برای جزئیات محصول به مشخصات مراجعه کنید.
IXFN20N120P
Product Overview
Category
The IXFN20N120P belongs to the category of power MOSFETs.
Use
It is commonly used in high-power applications such as motor control, power supplies, and inverters.
Characteristics
- High voltage and current handling capability
- Low on-state resistance
- Fast switching speed
- Low gate drive power requirement
Package
The IXFN20N120P is typically available in a TO-264 package.
Essence
The essence of the IXFN20N120P lies in its ability to efficiently handle high power levels while maintaining low losses.
Packaging/Quantity
It is usually packaged in tubes or trays and is available in quantities suitable for production runs.
Specifications
- Voltage Rating: 1200V
- Current Rating: 20A
- RDS(ON): 0.2 Ohms
- Gate Threshold Voltage: 4V
- Total Gate Charge: 80nC
- Diode Forward Voltage: 1.5V
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
The IXFN20N120P typically has three pins: 1. Source (S) 2. Drain (D) 3. Gate (G)
Functional Features
- High voltage blocking capability
- Low conduction losses
- Fast switching times
- Enhanced thermal performance
Advantages
- Suitable for high-power applications
- Efficient power handling
- Reduced heat dissipation
- Fast response times
Disadvantages
- Higher cost compared to lower power devices
- Requires careful consideration of driving circuitry due to high voltage ratings
Working Principles
The IXFN20N120P operates based on the principles of field-effect transistors, utilizing the control of an electric field to modulate the flow of current through the device. When a sufficient voltage is applied to the gate terminal, the device switches on, allowing current to flow from the source to the drain.
Detailed Application Field Plans
The IXFN20N120P is well-suited for use in various high-power applications, including: - Motor drives - Uninterruptible power supplies (UPS) - Renewable energy systems - Industrial power converters
Detailed and Complete Alternative Models
Some alternative models to the IXFN20N120P include: - IRFP4668PbF - FDPF20N60NZ - STW20NM60N
In conclusion, the IXFN20N120P power MOSFET offers high-performance characteristics suitable for demanding high-power applications, making it a valuable component in modern power electronics systems.
Word count: 386
10 سوال و پاسخ رایج مربوط به کاربرد IXFN20N120P در راه حل های فنی را فهرست کنید
What is the maximum voltage rating of IXFN20N120P?
- The maximum voltage rating of IXFN20N120P is 1200V.
What is the maximum current rating of IXFN20N120P?
- The maximum current rating of IXFN20N120P is 20A.
What is the on-state voltage drop of IXFN20N120P?
- The on-state voltage drop of IXFN20N120P is typically around 2.2V at a current of 20A.
What type of package does IXFN20N120P come in?
- IXFN20N120P comes in a TO-268 package.
What are the typical applications for IXFN20N120P?
- IXFN20N120P is commonly used in applications such as motor drives, power supplies, and renewable energy systems.
Does IXFN20N120P have built-in protection features?
- Yes, IXFN20N120P has built-in overcurrent and short-circuit protection.
What is the thermal resistance of IXFN20N120P?
- The thermal resistance of IXFN20N120P is typically around 0.35°C/W.
Can IXFN20N120P be used in high-frequency switching applications?
- Yes, IXFN20N120P is suitable for high-frequency switching due to its fast switching characteristics.
What is the operating temperature range of IXFN20N120P?
- The operating temperature range of IXFN20N120P is -55°C to 150°C.
Is IXFN20N120P RoHS compliant?
- Yes, IXFN20N120P is RoHS compliant, making it suitable for environmentally friendly designs.