Vishay Siliconix
تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
SI4116DY-T1-GE3
نمایش جزئیات برگه های اطلاعات

SI4116DY-T1-GE3

Product Overview

Category: Integrated Circuit
Use: Power Management
Characteristics: High efficiency, low power consumption
Package: SOIC-8
Essence: Voltage Regulator
Packaging/Quantity: Tape & Reel, 2500 units

Specifications

  • Input Voltage: 4.5V to 60V
  • Output Voltage: Adjustable from 0.8V to 50V
  • Output Current: Up to 2A
  • Dropout Voltage: 300mV at 2A
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. FB (Feedback)
  4. EN (Enable)
  5. NC (No Connection)
  6. SW (Switch)
  7. NC (No Connection)
  8. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Low dropout voltage
  • Overcurrent and thermal protection

Advantages and Disadvantages

Advantages: - High efficiency - Wide operating temperature range - Small package size

Disadvantages: - Limited output current compared to some alternatives

Working Principles

The SI4116DY-T1-GE3 is a voltage regulator integrated circuit that takes an input voltage and regulates it to a stable output voltage, providing a reliable power source for various applications.

Detailed Application Field Plans

This component is suitable for use in: - Industrial automation - Automotive electronics - Telecommunications equipment - Battery-powered devices

Detailed and Complete Alternative Models

  1. LM317
  2. LM7805
  3. LM1117

The SI4116DY-T1-GE3 is a versatile voltage regulator IC with a wide input voltage range and adjustable output, making it suitable for various applications in different industries. Its compact package and high efficiency make it an attractive choice for designs where space and power efficiency are critical.

[Word count: 276]

10 سوال و پاسخ رایج مربوط به کاربرد SI4116DY-T1-GE3 در راه حل های فنی را فهرست کنید

  1. What is the SI4116DY-T1-GE3 used for?

    • The SI4116DY-T1-GE3 is a dual N-channel 30-V (D-S) MOSFET designed for use in a wide range of applications, including power management and load switching.

  2. What are the key features of the SI4116DY-T1-GE3?

    • The key features include low on-resistance, fast switching speed, and a small form factor, making it suitable for high-efficiency power conversion and control.

  3. What is the maximum voltage and current rating for the SI4116DY-T1-GE3?

    • The SI4116DY-T1-GE3 has a maximum voltage rating of 30V and a continuous drain current of 7.3A.

  4. Can the SI4116DY-T1-GE3 be used in automotive applications?

    • Yes, the SI4116DY-T1-GE3 is AEC-Q101 qualified, making it suitable for automotive systems such as power distribution and motor control.

  5. What are the thermal considerations for using the SI4116DY-T1-GE3?

    • Proper thermal management is important due to the power dissipation characteristics of the device. Adequate heat sinking or thermal design should be implemented based on the specific application requirements.

  6. Is the SI4116DY-T1-GE3 suitable for use in battery management systems?

    • Yes, the SI4116DY-T1-GE3 can be used in battery management systems for tasks such as charging, discharging, and protection due to its low on-resistance and high current handling capability.

  7. Does the SI4116DY-T1-GE3 require any external components for operation?

    • The SI4116DY-T1-GE3 may require external components such as gate drivers, input protection, and output filtering depending on the specific application requirements.

  8. What are the typical applications for the SI4116DY-T1-GE3 in industrial settings?

    • In industrial settings, the SI4116DY-T1-GE3 can be used in motor control, power supplies, and general purpose switching applications due to its robustness and performance characteristics.

  9. Are there any recommended layout guidelines for using the SI4116DY-T1-GE3?

    • Yes, following recommended layout guidelines, including proper trace routing, decoupling capacitors placement, and thermal vias, can help optimize the performance and reliability of the SI4116DY-T1-GE3 in a given application.

  10. Where can I find detailed technical specifications and application notes for the SI4116DY-T1-GE3?

    • Detailed technical specifications, application notes, and design resources for the SI4116DY-T1-GE3 can be found on the manufacturer's website or through authorized distributors.