Vishay BC Components
تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
NTCLE100CL103GB0
نمایش جزئیات برگه های اطلاعات

NTCLE100CL103GB0

Product Overview

Category

The NTCLE100CL103GB0 belongs to the category of NTC thermistors.

Use

It is commonly used for temperature sensing and control applications.

Characteristics

  • High sensitivity to temperature changes
  • Wide operating temperature range
  • Small size for easy integration into electronic circuits

Package

The NTCLE100CL103GB0 is typically available in a small, cylindrical package.

Essence

This thermistor is essential for precise temperature measurement and regulation in various electronic devices and systems.

Packaging/Quantity

It is usually supplied in reels or bulk packaging, with quantities varying based on manufacturer specifications.

Specifications

  • Resistance at 25°C: 10kΩ
  • Tolerance: ±2%
  • Operating Temperature Range: -55°C to 150°C
  • Thermal Time Constant: 7s (in still air)

Detailed Pin Configuration

The NTCLE100CL103GB0 typically has two leads, with the resistance measured across these leads. The pinout configuration is as follows: - Pin 1: Connected to one end of the thermistor - Pin 2: Connected to the other end of the thermistor

Functional Features

  • Non-linear resistance-temperature characteristic
  • High sensitivity to temperature changes
  • Stable and reliable performance over a wide temperature range

Advantages and Disadvantages

Advantages

  • High sensitivity enables precise temperature measurements
  • Wide operating temperature range allows for versatile applications
  • Small size facilitates integration into compact electronic designs

Disadvantages

  • Non-linear response may require compensation in some applications
  • Limited precision compared to other temperature sensing technologies in certain scenarios

Working Principles

The NTCLE100CL103GB0 operates based on the negative temperature coefficient (NTC) effect, where its resistance decreases as the temperature increases. This change in resistance is utilized to measure and regulate temperature in electronic circuits.

Detailed Application Field Plans

Heating, Ventilation, and Air Conditioning (HVAC)

In HVAC systems, the NTCLE100CL103GB0 can be used for temperature monitoring and control in air conditioning units, heating systems, and refrigeration equipment.

Automotive Electronics

Within automotive electronics, this thermistor is employed for temperature sensing in engine management systems, climate control modules, and battery management systems.

Consumer Electronics

In consumer electronics, the NTCLE100CL103GB0 finds application in devices such as coffee makers, irons, and hair dryers for temperature regulation and safety monitoring.

Detailed and Complete Alternative Models

  • NTCLE100E3103JB0: Similar characteristics with a different resistance value
  • NTCLE100E3473JB0: Higher resistance variant for specific applications
  • NTCLE100E3103KB0: Alternative model with enhanced precision and tighter tolerance

This completes the entry for NTCLE100CL103GB0, covering its product details, specifications, functional features, advantages, working principles, application field plans, and alternative models.

Word Count: 443

10 سوال و پاسخ رایج مربوط به کاربرد NTCLE100CL103GB0 در راه حل های فنی را فهرست کنید

  1. What is the NTCLE100CL103GB0 used for?

    • The NTCLE100CL103GB0 is a thermistor commonly used for temperature sensing and control in various technical solutions.

  2. What is the temperature range of NTCLE100CL103GB0?

    • The NTCLE100CL103GB0 has a temperature range of -40°C to 125°C, making it suitable for a wide range of applications.

  3. How does NTCLE100CL103GB0 work as a temperature sensor?

    • The NTCLE100CL103GB0 operates based on the principle of resistance change with temperature, providing an analog output proportional to the temperature.

  4. What are the typical applications of NTCLE100CL103GB0?

    • Typical applications include temperature monitoring and control in consumer electronics, automotive systems, industrial equipment, and HVAC systems.

  5. What is the accuracy of NTCLE100CL103GB0?

    • The NTCLE100CL103GB0 offers high accuracy in temperature measurement, typically within ±1°C.

  6. How should NTCLE100CL103GB0 be connected in a circuit?

    • It should be connected in series with a resistor and powered by a constant current source to form a voltage divider circuit for accurate temperature measurement.

  7. Can NTCLE100CL103GB0 be used in harsh environments?

    • Yes, it can be used in harsh environments due to its rugged construction and wide temperature range.

  8. What are the key considerations when designing with NTCLE100CL103GB0?

    • Key considerations include calibration for accurate temperature readings, thermal management, and protection against moisture and mechanical stress.

  9. Does NTCLE100CL103GB0 require any special signal conditioning?

    • Signal conditioning may be required to linearize the output response of the thermistor and compensate for non-linearities in the temperature-resistance curve.

  10. Are there any specific soldering or handling precautions for NTCLE100CL103GB0?

    • Soldering should be done carefully to avoid overheating the thermistor, and proper ESD precautions should be taken during handling to prevent damage to the device.