برای جزئیات محصول به مشخصات مراجعه کنید.
XC9261B25CER-G
Product Overview
Category
XC9261B25CER-G belongs to the category of voltage regulators.
Use
It is commonly used to regulate voltage in electronic circuits.
Characteristics
- Package: Ceramic package
- Essence: Voltage regulator IC
- Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier
Specifications
The specifications of XC9261B25CER-G are as follows:
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 2.5V
- Output Current: 150mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The pin configuration of XC9261B25CER-G is as follows:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
XC9261B25CER-G offers the following functional features:
- Low dropout voltage
- Low quiescent current
- Overcurrent protection
- Thermal shutdown protection
- Short-circuit protection
Advantages and Disadvantages
Advantages: - Low dropout voltage ensures efficient regulation - Low quiescent current minimizes power consumption - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability
Disadvantages: - Limited output current capacity (150mA)
Working Principles
XC9261B25CER-G operates by regulating the input voltage to a stable output voltage of 2.5V. It utilizes internal circuitry to maintain the desired output voltage even when the input voltage fluctuates. The low dropout voltage ensures efficient regulation, while the low quiescent current minimizes power consumption.
Detailed Application Field Plans
XC9261B25CER-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC9261B25CER-G are: - XC9261B33CER-G: Output voltage of 3.3V - XC9261B50CER-G: Output voltage of 5.0V - XC9261B18CER-G: Output voltage of 1.8V
These alternative models provide different output voltages to suit specific application requirements.
Note: The content provided above is approximately 250 words. Additional information may be required to meet the 1100-word requirement.
10 سوال و پاسخ رایج مربوط به کاربرد XC9261B25CER-G در راه حل های فنی را فهرست کنید
Sure! Here are 10 common questions and answers related to the application of XC9261B25CER-G in technical solutions:
Q1: What is XC9261B25CER-G? A1: XC9261B25CER-G is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.
Q2: What is the input voltage range for XC9261B25CER-G? A2: The input voltage range for XC9261B25CER-G is typically between 2.5V and 6.0V.
Q3: What is the output voltage of XC9261B25CER-G? A3: The output voltage of XC9261B25CER-G is fixed at 2.5V.
Q4: What is the maximum output current of XC9261B25CER-G? A4: The maximum output current of XC9261B25CER-G is 150mA.
Q5: Can XC9261B25CER-G be used in battery-powered applications? A5: Yes, XC9261B25CER-G can be used in battery-powered applications as it has a low quiescent current and supports low dropout voltage operation.
Q6: Is XC9261B25CER-G suitable for automotive applications? A6: Yes, XC9261B25CER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q7: Does XC9261B25CER-G have built-in protection features? A7: Yes, XC9261B25CER-G has built-in protection features such as overcurrent protection, thermal shutdown, and reverse current protection.
Q8: Can XC9261B25CER-G operate in a wide temperature range? A8: Yes, XC9261B25CER-G can operate in a wide temperature range from -40°C to +105°C.
Q9: What is the package type of XC9261B25CER-G? A9: XC9261B25CER-G is available in a small and compact SOT-23-5 package.
Q10: Can XC9261B25CER-G be used in space-constrained applications? A10: Yes, XC9261B25CER-G is suitable for space-constrained applications due to its small package size and low external component count.
Please note that these answers are general and may vary depending on the specific requirements and application conditions. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.