تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
XC9261B10DER-G

XC9261B10DER-G

Product Overview

Category

XC9261B10DER-G belongs to the category of voltage regulators.

Use

It is commonly used for voltage regulation in electronic circuits.

Characteristics

  • Package: DFN2020-6
  • Essence: Low dropout voltage regulator
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

The specifications of XC9261B10DER-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 1.0V
  • Maximum Output Current: 100mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC9261B10DER-G has a total of six pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection pin
  5. VOUT: Output voltage pin
  6. CE: Capacitor connection pin

Functional Features

The functional features of XC9261B10DER-G include:

  • Low dropout voltage: The regulator maintains a stable output voltage even when the input voltage is close to the desired output voltage.
  • Low quiescent current: It consumes minimal current when in standby mode, resulting in power efficiency.
  • Overcurrent protection: The device automatically shuts down if the output current exceeds the maximum specified value, protecting the circuit from damage.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent overheating.

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient voltage regulation. - Low quiescent current results in power savings. - Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages: - Limited maximum output current of 100mA may not be suitable for high-power applications. - Input voltage range is limited to 2.5V to 6.0V, which may restrict its use in certain circuits.

Working Principles

XC9261B10DER-G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The regulator compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC9261B10DER-G finds application in various electronic devices and circuits, including but not limited to:

  1. Battery-powered devices: It can be used to regulate the voltage in portable electronic devices such as smartphones, tablets, and wearable devices.
  2. IoT devices: XC9261B10DER-G can be employed in Internet of Things (IoT) devices that require efficient voltage regulation for reliable operation.
  3. Industrial control systems: It can be utilized in industrial control systems where stable and regulated voltage is crucial for proper functioning.
  4. Automotive electronics: The regulator can be integrated into automotive electronic systems to ensure stable voltage supply to various components.

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC9261B10DER-G are:

  1. XC6220B12AMR-G: Low dropout voltage regulator with an output voltage of 1.2V and a maximum output current of 200mA.
  2. XC6206P332MR-G: Low dropout voltage regulator with an output voltage of 3.3V and a maximum output current of 200mA.
  3. XC6219B33AMR-G: Low dropout voltage regulator with an output voltage of 3.3V and a maximum output current of 150mA.

These alternative models provide similar functionality and can be chosen based on specific requirements and constraints.

In conclusion, XC9261B10DER-G is a low dropout voltage regulator that offers stable voltage regulation with low quiescent current consumption. It finds application in various electronic devices and circuits, providing reliable voltage regulation.

10 سوال و پاسخ رایج مربوط به کاربرد XC9261B10DER-G در راه حل های فنی را فهرست کنید

Sure! Here are 10 common questions and answers related to the application of XC9261B10DER-G in technical solutions:

Q1: What is XC9261B10DER-G? A1: XC9261B10DER-G is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.

Q2: What is the input voltage range for XC9261B10DER-G? A2: The input voltage range for XC9261B10DER-G is typically between 2.5V and 6.0V.

Q3: What is the output voltage of XC9261B10DER-G? A3: The output voltage of XC9261B10DER-G is fixed at 1.0V.

Q4: What is the maximum output current of XC9261B10DER-G? A4: The maximum output current of XC9261B10DER-G is 100mA.

Q5: Can XC9261B10DER-G be used in battery-powered applications? A5: Yes, XC9261B10DER-G can be used in battery-powered applications as it has a low quiescent current and operates efficiently with low input voltages.

Q6: Does XC9261B10DER-G have built-in protection features? A6: Yes, XC9261B10DER-G has built-in protection features such as overcurrent protection, thermal shutdown, and reverse current protection.

Q7: Is XC9261B10DER-G suitable for space-constrained designs? A7: Yes, XC9261B10DER-G is available in a small package (e.g., SOT-25) which makes it suitable for space-constrained designs.

Q8: Can XC9261B10DER-G operate in a wide temperature range? A8: Yes, XC9261B10DER-G can operate in a wide temperature range, typically from -40°C to +85°C.

Q9: Can XC9261B10DER-G be used in automotive applications? A9: Yes, XC9261B10DER-G is AEC-Q100 qualified and can be used in automotive applications.

Q10: Are there any evaluation boards or reference designs available for XC9261B10DER-G? A10: Yes, Torex Semiconductor provides evaluation boards and reference designs for XC9261B10DER-G to facilitate its integration into various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.