تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
XC6123C716ER-G

XC6123C716ER-G

Product Overview

Category

XC6123C716ER-G belongs to the category of electronic components.

Use

It is commonly used in electronic circuits for voltage regulation and power management purposes.

Characteristics

  • Voltage regulation capability
  • Power management functionality
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6123C716ER-G is available in a small surface-mount package.

Essence

The essence of XC6123C716ER-G lies in its ability to regulate voltage and manage power efficiently in electronic circuits.

Packaging/Quantity

XC6123C716ER-G is typically packaged in reels or tubes, with a specific quantity per package depending on the manufacturer's specifications.

Specifications

XC6123C716ER-G has the following specifications:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123C716ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

XC6123C716ER-G offers the following functional features:

  • Voltage regulation: It ensures a stable output voltage within the specified range.
  • Power management: It efficiently manages power consumption, reducing energy waste.
  • Enable pin: The optional enable pin allows for control of the device's operation.

Advantages and Disadvantages

Advantages

  • Compact size makes it suitable for space-constrained applications.
  • High efficiency results in reduced power loss.
  • Wide input and output voltage ranges provide flexibility in various circuit designs.

Disadvantages

  • Limited maximum output current may not be sufficient for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the device.

Working Principles

XC6123C716ER-G operates based on a voltage regulation principle. It uses internal circuitry to maintain a stable output voltage regardless of variations in the input voltage or load conditions. The enable pin allows for control over the device's operation, providing additional flexibility.

Detailed Application Field Plans

XC6123C716ER-G finds applications in various electronic devices and systems, including but not limited to:

  1. Portable electronic devices: Such as smartphones, tablets, and portable gaming consoles.
  2. IoT devices: Including smart home devices, wearables, and sensor nodes.
  3. Automotive electronics: Used in vehicle infotainment systems, navigation systems, and lighting controls.
  4. Industrial equipment: Power management in industrial automation systems, control panels, and motor drives.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6123C716ER-G include:

  1. XC6206P332MR-G: A low dropout voltage regulator with a maximum output current of 200mA.
  2. XC6220B332MR-G: A compact voltage regulator with a wide input voltage range and low quiescent current.
  3. XC6219B332MR-G: A power management IC with an enable pin and high efficiency.

These alternative models can be considered based on specific requirements and design constraints.

Word count: 536 words

10 سوال و پاسخ رایج مربوط به کاربرد XC6123C716ER-G در راه حل های فنی را فهرست کنید

Sure! Here are 10 common questions and answers related to the application of XC6123C716ER-G in technical solutions:

  1. Q: What is XC6123C716ER-G? A: XC6123C716ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6123C716ER-G? A: The operating voltage range of XC6123C716ER-G is from 0.7V to 6.0V.

  3. Q: What is the output type of XC6123C716ER-G? A: XC6123C716ER-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.

  4. Q: What is the typical quiescent current consumption of XC6123C716ER-G? A: The typical quiescent current consumption of XC6123C716ER-G is very low, around 1.0µA.

  5. Q: Can XC6123C716ER-G be used for overvoltage protection? A: No, XC6123C716ER-G is not designed for overvoltage protection. It is primarily used for undervoltage detection.

  6. Q: What is the accuracy of the voltage detection threshold in XC6123C716ER-G? A: The accuracy of the voltage detection threshold in XC6123C716ER-G is typically ±1.5%.

  7. Q: Is XC6123C716ER-G suitable for battery-powered applications? A: Yes, XC6123C716ER-G is suitable for battery-powered applications due to its low quiescent current consumption.

  8. Q: Can XC6123C716ER-G be used in automotive applications? A: Yes, XC6123C716ER-G is suitable for automotive applications as it can operate within the specified temperature range of -40°C to +105°C.

  9. Q: Does XC6123C716ER-G have built-in hysteresis? A: Yes, XC6123C716ER-G has a built-in hysteresis of typically 10% of the detection voltage threshold. This helps to prevent oscillation and ensure stable operation.

  10. Q: What is the package type of XC6123C716ER-G? A: XC6123C716ER-G is available in a SOT-23-5 package, which is a small surface-mount package commonly used in electronic devices.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.