Torex Semiconductor Ltd
تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
XC6108N50BGR-G
نمایش جزئیات برگه های اطلاعات

XC6108N50BGR-G

Product Overview

Category

XC6108N50BGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6108N50BGR-G is available in a small surface-mount package.

Essence

The essence of XC6108N50BGR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6108N50BGR-G is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 5.0V ± 2%
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6108N50BGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive heat, the regulator shuts down to prevent damage.
  • Low quiescent current: The device consumes minimal current when not actively regulating voltage.

Advantages

  • Small form factor allows for easy integration into compact electronic designs.
  • Wide input voltage range provides flexibility in various applications.
  • Low dropout voltage minimizes power loss and improves efficiency.
  • Overcurrent protection ensures the safety of connected devices.

Disadvantages

  • Limited maximum output current may restrict its use in high-power applications.
  • Temperature range limitations may not be suitable for extreme environments.

Working Principles

XC6108N50BGR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6108N50BGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. XC6206P332MR-G: Similar voltage regulator with a lower dropout voltage.
  2. XC6220N33AMR-G: Voltage regulator with higher maximum output current.
  3. XC6219B332MR-G: Voltage regulator with a wider operating temperature range.

These alternative models offer different specifications and features, allowing users to choose the most suitable option for their specific requirements.

Word count: 386 words

10 سوال و پاسخ رایج مربوط به کاربرد XC6108N50BGR-G در راه حل های فنی را فهرست کنید

Sure! Here are 10 common questions and answers related to the application of XC6108N50BGR-G in technical solutions:

  1. Q: What is XC6108N50BGR-G? A: XC6108N50BGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108N50BGR-G? A: The operating voltage range of XC6108N50BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N50BGR-G work? A: XC6108N50BGR-G works by comparing the input voltage with a reference voltage and generating an output signal when the input voltage falls below a certain threshold.

  4. Q: What is the output type of XC6108N50BGR-G? A: XC6108N50BGR-G has an open-drain output, which means it can be connected to other devices or circuits for further processing.

  5. Q: What is the typical quiescent current consumption of XC6108N50BGR-G? A: The typical quiescent current consumption of XC6108N50BGR-G is around 1.0µA, making it suitable for low-power applications.

  6. Q: Can XC6108N50BGR-G be used for overvoltage protection? A: No, XC6108N50BGR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  7. Q: What is the accuracy of the voltage detection threshold in XC6108N50BGR-G? A: The accuracy of the voltage detection threshold in XC6108N50BGR-G is typically ±1.5%.

  8. Q: Can XC6108N50BGR-G be used in automotive applications? A: Yes, XC6108N50BGR-G is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.

  9. Q: What is the maximum supply voltage that XC6108N50BGR-G can handle? A: The maximum supply voltage that XC6108N50BGR-G can handle is 6.5V.

  10. Q: Is XC6108N50BGR-G available in different package options? A: Yes, XC6108N50BGR-G is available in various package options, including SOT-23 and USP-4B, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines of XC6108N50BGR-G.