Torex Semiconductor Ltd
تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
XC6108N21CGR-G
نمایش جزئیات برگه های اطلاعات

XC6108N21CGR-G

Product Overview

Category

XC6108N21CGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6108N21CGR-G is available in a small surface-mount package.

Essence

The essence of XC6108N21CGR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6108N21CGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.1V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N21CGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108N21CGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
  • Low quiescent current: The device consumes minimal current when not actively regulating voltage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact electronic designs.
  • Wide input voltage range makes it suitable for various applications.
  • Low dropout voltage minimizes power loss.
  • Overcurrent protection ensures the safety of connected devices.

Disadvantages

  • Limited output current may not be sufficient for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

XC6108N21CGR-G operates based on a feedback mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any input voltage variations.

Detailed Application Field Plans

XC6108N21CGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N21CGR-G are: - LM1117-2.1 - MCP1702-2102E/TO - TS2937CP-2.1

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 345 words

10 سوال و پاسخ رایج مربوط به کاربرد XC6108N21CGR-G در راه حل های فنی را فهرست کنید

Sure! Here are 10 common questions and answers related to the application of XC6108N21CGR-G in technical solutions:

  1. Q: What is XC6108N21CGR-G? A: XC6108N21CGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6108N21CGR-G? A: The operating voltage range of XC6108N21CGR-G is typically between 0.9V and 6.0V.

  3. Q: What is the purpose of using XC6108N21CGR-G in a technical solution? A: XC6108N21CGR-G is commonly used to monitor the power supply voltage and provide a reset signal to microcontrollers or other digital circuits when the voltage drops below a certain threshold.

  4. Q: How does XC6108N21CGR-G detect voltage levels? A: XC6108N21CGR-G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold voltage.

  5. Q: What is the output type of XC6108N21CGR-G? A: XC6108N21CGR-G has an open-drain output, which means it can sink current but cannot source current.

  6. Q: Can XC6108N21CGR-G be used in battery-powered applications? A: Yes, XC6108N21CGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  7. Q: What is the typical accuracy of XC6108N21CGR-G? A: The typical accuracy of XC6108N21CGR-G is ±1.5% at room temperature.

  8. Q: Can XC6108N21CGR-G withstand high voltage transients? A: Yes, XC6108N21CGR-G has built-in overvoltage protection and can withstand voltage transients up to 30V.

  9. Q: Is XC6108N21CGR-G suitable for automotive applications? A: Yes, XC6108N21CGR-G is AEC-Q100 qualified and can be used in automotive applications.

  10. Q: What package does XC6108N21CGR-G come in? A: XC6108N21CGR-G is available in a compact SOT-25 package, which is small and suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.