برای جزئیات محصول به مشخصات مراجعه کنید.
XC6108C44DGR-G
Product Overview
Category
XC6108C44DGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize voltage levels.
Characteristics
- Package: DGR-G (44-pin package)
- Essence: Voltage regulator
- Packaging/Quantity: Typically sold in reels or trays, with a quantity of 2500 units per reel/tray.
Specifications
The specifications of XC6108C44DGR-G are as follows:
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.5V
- Maximum Output Current: 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The pin configuration of XC6108C44DGR-G is as follows:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- VOUT: Output voltage pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
- NC: No connection pin
Functional Features
XC6108C44DGR-G offers the following functional features:
- Voltage regulation: It provides a stable output voltage within the specified range.
- Low dropout voltage: The dropout voltage is minimal, ensuring efficient power conversion.
- Enable pin: The enable pin allows for easy control of the regulator's operation.
Advantages and Disadvantages
Advantages
- Wide input voltage range
- Low quiescent current
- Small package size
- Easy to use and integrate into circuits
Disadvantages
- Limited maximum output current (100mA)
- Dropout voltage may affect efficiency in certain applications
Working Principles
XC6108C44DGR-G works based on the principle of voltage regulation using a feedback mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage despite variations in the input voltage.
Detailed Application Field Plans
XC6108C44DGR-G finds applications in various electronic devices and systems, including but not limited to:
- Mobile phones
- Portable media players
- Digital cameras
- Wireless communication devices
- IoT (Internet of Things) devices
- Battery-powered devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C44DGR-G are:
- XC6206P332MR-G: A 3.3V voltage regulator with similar characteristics and package.
- XC6220B332MR-G: Another 3.3V voltage regulator with a different package and slightly different specifications.
- XC6219B332MR-G: A 3.3V voltage regulator with enhanced features and improved performance.
These alternative models provide options for designers based on specific requirements and constraints.
Word count: 509 words
10 سوال و پاسخ رایج مربوط به کاربرد XC6108C44DGR-G در راه حل های فنی را فهرست کنید
Sure! Here are 10 common questions and answers related to the application of XC6108C44DGR-G in technical solutions:
Q: What is XC6108C44DGR-G? A: XC6108C44DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6108C44DGR-G? A: The operating voltage range of XC6108C44DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108C44DGR-G help in technical solutions? A: XC6108C44DGR-G helps in technical solutions by ensuring proper power supply voltage levels, preventing malfunctions or data corruption due to low voltage conditions.
Q: Can XC6108C44DGR-G be used in battery-powered applications? A: Yes, XC6108C44DGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q: What is the output type of XC6108C44DGR-G? A: XC6108C44DGR-G has an open-drain output type, which means it can be easily interfaced with other digital circuits.
Q: What is the typical reset threshold voltage of XC6108C44DGR-G? A: The typical reset threshold voltage of XC6108C44DGR-G is 4.4V.
Q: Does XC6108C44DGR-G have built-in hysteresis? A: Yes, XC6108C44DGR-G has built-in hysteresis, which helps to prevent oscillation or chattering of the reset signal near the threshold voltage.
Q: Can XC6108C44DGR-G be used in automotive applications? A: Yes, XC6108C44DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6108C44DGR-G? A: XC6108C44DGR-G is available in a compact SOT-23-5 package.
Q: Is XC6108C44DGR-G RoHS compliant? A: Yes, XC6108C44DGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C44DGR-G.