TS5A2066YZPR

Product Overview

• Category: Integrated Circuit (IC)
• Use: Analog Switch
• Characteristics: Low ON-State Resistance, Low Power Consumption
• Package: 16-pin Thin Shrink Small Outline Package (TSSOP)
• Essence: High-performance analog switch
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Number of Channels: 1
• Switch Configuration: SPDT (Single Pole Double Throw)
• ON-State Resistance: 0.4 Ohms (Typical)
• Supply Voltage Range: 1.65V to 5.5V
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TS5A2066YZPR has a total of 16 pins. The pin configuration is as follows:

1. IN1: Input 1
2. IN2: Input 2
3. COM: Common Terminal
4. NO: Normally Open Terminal
5. NC: Normally Closed Terminal
6. GND: Ground
7. VCC: Supply Voltage
8. EN: Enable Control
9. IN3: Input 3
10. IN4: Input 4
11. IN5: Input 5
12. IN6: Input 6
13. IN7: Input 7
14. IN8: Input 8
15. IN9: Input 9
16. IN10: Input 10

Functional Features

• Low ON-State Resistance for minimal signal distortion
• Low power consumption for energy efficiency
• Wide supply voltage range for versatile applications
• Fast switching speed for real-time signal routing
• Break-before-make switching action for seamless transitions

Advantages and Disadvantages

Advantages: - High-performance analog switch - Low ON-State Resistance - Low power consumption - Versatile supply voltage range - Fast switching speed

Disadvantages: - Limited number of channels (1 channel)

Working Principles

The TS5A2066YZPR is an analog switch that allows or blocks the flow of signals between different input and output terminals. It operates based on the control signal received at the EN pin. When the control signal is high, the switch is turned ON, allowing the signal to pass through from the input terminal to the output terminal. Conversely, when the control signal is low, the switch is turned OFF, blocking the signal flow.

Detailed Application Field Plans

The TS5A2066YZPR can be used in various applications, including:

1. Audio Systems: Signal routing and audio source selection.
2. Communication Devices: Switching between different communication channels.
3. Test and Measurement Equipment: Signal switching for accurate measurements.
4. Industrial Automation: Control signal routing in industrial processes.
5. Medical Devices: Signal routing and switching in medical equipment.

Detailed and Complete Alternative Models

1. TS5A2066YFPR: Similar specifications and features, but with a different package (20-pin DSBGA).
2. TS5A2066RSER: Similar specifications and features, but with a different package (14-pin VQFN).
3. TS5A2066YDGNR: Similar specifications and features, but with a different package (8-pin MSOP).

(Note: This list is not exhaustive and there may be other alternative models available in the market.)

This entry provides a comprehensive overview of the TS5A2066YZPR analog switch. It includes information about its product category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.