تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
TPS2836DR

TPS2836DR

Product Overview

Category

The TPS2836DR belongs to the category of integrated circuits (ICs).

Use

This IC is primarily used as a power distribution switch.

Characteristics

  • High efficiency
  • Low on-resistance
  • Overcurrent protection
  • Thermal shutdown protection

Package

The TPS2836DR is available in a small outline package (SOP) with eight pins.

Essence

The essence of the TPS2836DR lies in its ability to efficiently distribute power while providing protection against overcurrent and thermal shutdown.

Packaging/Quantity

The TPS2836DR is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer.

Specifications

  • Input voltage range: 2.7V to 5.5V
  • Output voltage range: 0V to Vcc
  • Maximum continuous current: 1.5A
  • On-resistance: 80mΩ (typical)
  • Operating temperature range: -40°C to 85°C

Pin Configuration

The TPS2836DR has the following pin configuration:

```


| | --| EN OUT |-- Pin 1 --| GND IN+ |-- Pin 2 --| IN- IN- |-- Pin 3 --| PG FB |-- Pin 4 --| UVLO SS |-- Pin 5 --| NC |-- Pin 6 --| NC |-- Pin 7 --| VIN NC |-- Pin 8 |___________| ```

Functional Features

  • Enable (EN) pin for controlling the power switch
  • Power Good (PG) pin indicating output voltage status
  • Undervoltage Lockout (UVLO) for protection against low input voltage
  • Soft-start (SS) pin for controlled startup

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power loss
  • Overcurrent protection safeguards the circuitry
  • Thermal shutdown protection prevents overheating

Disadvantages

  • Limited maximum continuous current of 1.5A
  • Relatively high on-resistance compared to some alternative models

Working Principles

The TPS2836DR operates by controlling the flow of power from the input to the output based on the enable signal. It ensures efficient power distribution while providing protection against overcurrent and thermal shutdown.

Detailed Application Field Plans

The TPS2836DR finds applications in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - Industrial automation - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the TPS2836DR include: - TPS2826DR - TPS2846DR - TPS2856DR

These models can be considered as alternatives depending on specific requirements and constraints.

Word count: 323 words

10 سوال و پاسخ رایج مربوط به کاربرد TPS2836DR در راه حل های فنی را فهرست کنید

Sure! Here are 10 common questions and answers related to the application of TPS2836DR in technical solutions:

  1. Q: What is TPS2836DR? A: TPS2836DR is a high-speed, dual-channel power distribution switch designed for applications requiring heavy capacitive loads or short circuits protection.

  2. Q: What is the maximum input voltage supported by TPS2836DR? A: The maximum input voltage supported by TPS2836DR is 5.5V.

  3. Q: Can TPS2836DR handle high capacitive loads? A: Yes, TPS2836DR is specifically designed to handle heavy capacitive loads up to 1000µF.

  4. Q: Does TPS2836DR provide overcurrent protection? A: Yes, TPS2836DR provides overcurrent protection by limiting the output current during a fault condition.

  5. Q: What is the typical operating current of TPS2836DR? A: The typical operating current of TPS2836DR is around 20µA.

  6. Q: Can TPS2836DR be used in automotive applications? A: Yes, TPS2836DR is suitable for automotive applications as it can operate within the automotive temperature range (-40°C to +125°C).

  7. Q: Does TPS2836DR have thermal shutdown protection? A: Yes, TPS2836DR has built-in thermal shutdown protection to prevent damage due to excessive heat.

  8. Q: What is the maximum continuous current rating of TPS2836DR? A: The maximum continuous current rating of TPS2836DR is 1.5A per channel.

  9. Q: Can TPS2836DR be used in battery-powered applications? A: Yes, TPS2836DR can be used in battery-powered applications as it has a low quiescent current and supports a wide input voltage range.

  10. Q: Is TPS2836DR available in different package options? A: Yes, TPS2836DR is available in various package options, including SOIC-8 and VSON-8, to suit different application requirements.

Please note that these answers are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.