برای جزئیات محصول به مشخصات مراجعه کنید.
SN75HVD11DRG4
Product Overview
Category
SN75HVD11DRG4 belongs to the category of integrated circuits (ICs).
Use
It is commonly used as a transceiver in various communication systems.
Characteristics
- High-speed data transmission
- Low power consumption
- Robustness and reliability
- Wide operating voltage range
Package
SN75HVD11DRG4 is available in a small outline package (SOIC) with 8 pins.
Essence
The essence of SN75HVD11DRG4 lies in its ability to facilitate bidirectional data communication between different devices or systems.
Packaging/Quantity
SN75HVD11DRG4 is typically sold in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.
Specifications
- Supply Voltage: 3.3V
- Data Rate: Up to 1 Mbps
- Operating Temperature Range: -40°C to +85°C
- Input Logic Levels: CMOS/TTL compatible
- Output Logic Levels: RS-485 compliant
Detailed Pin Configuration
- VCC: Power supply input
- GND: Ground reference
- RO: Receiver output
- RE: Receiver enable
- DE: Driver enable
- DI: Driver input
- B: Bus terminal B
- A: Bus terminal A
Functional Features
- Half-duplex communication
- Built-in fail-safe receiver
- Thermal shutdown protection
- Short-circuit protection
- ESD protection
Advantages
- High-speed data transmission capability
- Low power consumption for energy-efficient operation
- Reliable and robust performance in harsh environments
- Wide operating voltage range allows compatibility with various systems
Disadvantages
- Limited to half-duplex communication
- Requires external components for full RS-485 compliance
Working Principles
SN75HVD11DRG4 operates based on the RS-485 standard, which uses differential signaling to transmit data. It employs a balanced line driver and receiver to ensure noise immunity and long-distance communication.
Detailed Application Field Plans
SN75HVD11DRG4 finds applications in various fields, including: 1. Industrial automation 2. Building automation 3. Automotive systems 4. Telecommunications 5. Security systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to SN75HVD11DRG4 are: 1. MAX485 2. LTC485 3. ADM485 4. SP3485 5. ST485
These models offer similar functionality and can be used interchangeably depending on specific requirements.
Word count: 324 words
10 سوال و پاسخ رایج مربوط به کاربرد SN75HVD11DRG4 در راه حل های فنی را فهرست کنید
Sure! Here are 10 common questions and answers related to the application of SN75HVD11DRG4 in technical solutions:
Q: What is SN75HVD11DRG4? A: SN75HVD11DRG4 is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus.
Q: What is the operating voltage range of SN75HVD11DRG4? A: The operating voltage range of SN75HVD11DRG4 is typically from 3.3V to 5V.
Q: Can SN75HVD11DRG4 be used for both low-speed and high-speed CAN applications? A: No, SN75HVD11DRG4 is specifically designed for high-speed CAN applications.
Q: What is the maximum data rate supported by SN75HVD11DRG4? A: SN75HVD11DRG4 supports a maximum data rate of up to 1 Mbps.
Q: Does SN75HVD11DRG4 have built-in protection features? A: Yes, SN75HVD11DRG4 has built-in protection features such as thermal shutdown, short-circuit protection, and undervoltage lockout.
Q: Can SN75HVD11DRG4 be used in automotive applications? A: Yes, SN75HVD11DRG4 is suitable for automotive applications as it meets the requirements of the Automotive Electronics Council (AEC-Q100).
Q: What is the typical quiescent current consumption of SN75HVD11DRG4? A: The typical quiescent current consumption of SN75HVD11DRG4 is around 5 mA.
Q: Does SN75HVD11DRG4 support bus fault detection? A: Yes, SN75HVD11DRG4 supports bus fault detection and reports it through the TXD pin.
Q: Can SN75HVD11DRG4 be used in industrial automation applications? A: Yes, SN75HVD11DRG4 is suitable for industrial automation applications as it can operate in harsh environments with extended temperature ranges.
Q: What is the package type of SN75HVD11DRG4? A: SN75HVD11DRG4 is available in an SOIC-8 package.
Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.