The SN74AHC16374DLR has a total of 48 pins arranged as follows:
Advantages: - High-speed operation enables quick data processing. - Low-power consumption extends battery life in portable devices. - 3-state outputs allow for efficient bus sharing. - Compact TSSOP-48 package saves board space.
Disadvantages: - Limited number of bits (16) may not be sufficient for certain applications. - Requires external clock and control signals for proper operation.
The SN74AHC16374DLR is a D-type flip-flop that stores and transfers binary data. It operates based on the rising edge of the clock input signal (CP). When the clock enable input (CE) is high, the data inputs (D0-D15) are transferred to the corresponding data outputs (Q0-Q15) on the rising edge of the clock. The output enable input (OE) controls whether the data outputs are active or in a high-impedance
Sure! Here are 10 common questions and answers related to the application of SN74AHC16374DLR in technical solutions:
Q: What is SN74AHC16374DLR? A: SN74AHC16374DLR is a 16-bit D-type flip-flop with 3-state outputs, commonly used in digital circuits.
Q: What is the operating voltage range for SN74AHC16374DLR? A: The operating voltage range for SN74AHC16374DLR is typically between 2V and 5.5V.
Q: What is the maximum clock frequency supported by SN74AHC16374DLR? A: SN74AHC16374DLR can support clock frequencies up to 100 MHz.
Q: How many flip-flops are there in SN74AHC16374DLR? A: SN74AHC16374DLR consists of 16 individual D-type flip-flops.
Q: Can SN74AHC16374DLR be used for both synchronous and asynchronous applications? A: Yes, SN74AHC16374DLR can be used for both synchronous and asynchronous applications.
Q: What is the output drive capability of SN74AHC16374DLR? A: SN74AHC16374DLR has a typical output drive capability of ±8 mA.
Q: Does SN74AHC16374DLR have any built-in protection features? A: Yes, SN74AHC16374DLR has built-in ESD (electrostatic discharge) protection on all inputs and outputs.
Q: Can SN74AHC16374DLR be cascaded to create larger registers? A: Yes, SN74AHC16374DLR can be cascaded to create larger registers by connecting the outputs of one chip to the inputs of another.
Q: What is the power supply current consumption of SN74AHC16374DLR? A: The power supply current consumption of SN74AHC16374DLR depends on the operating conditions but typically ranges from 2 mA to 10 mA.
Q: Is SN74AHC16374DLR available in different package options? A: Yes, SN74AHC16374DLR is available in various package options, such as SOIC (Small Outline Integrated Circuit) and TSSOP (Thin Shrink Small Outline Package).
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.