تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
DS26C31TN/NOPB

DS26C31TN/NOPB

Product Overview

  • Category: Integrated Circuit
  • Use: Line Driver or Receiver
  • Characteristics: High-speed, Low-power, Differential Line Transceiver
  • Package: 16-Pin PDIP (Plastic Dual In-Line Package)
  • Essence: Converts TTL/CMOS Logic Levels to Differential Output Signals
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 4.75V to 5.25V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 20 Mbps
  • Input Thresholds: ±200mV
  • Output Voltage Swing: ±3.5V into a 54Ω Load
  • Propagation Delay: 15ns (typical)
  • Power Dissipation: 100mW (typical)

Pin Configuration

The DS26C31TN/NOPB has a 16-pin package with the following pin configuration:

  1. VCC
  2. A Input
  3. B Input
  4. Y Output
  5. Z Output
  6. GND
  7. B Input
  8. A Input
  9. Z Output
  10. Y Output
  11. GND
  12. B Input
  13. A Input
  14. Z Output
  15. Y Output
  16. GND

Functional Features

  • Converts TTL/CMOS Logic Levels to Differential Output Signals
  • Provides High-Speed Data Transmission
  • Low Power Consumption
  • Compatible with RS-422 and RS-485 Standards
  • Allows for Full-Duplex or Half-Duplex Communication

Advantages and Disadvantages

Advantages

  • High-speed data transmission up to 20 Mbps
  • Low power consumption
  • Wide operating temperature range (-40°C to +85°C)
  • Compatible with industry standards (RS-422 and RS-485)
  • Full-duplex or half-duplex communication support

Disadvantages

  • Limited input threshold range (±200mV)
  • Requires external resistors for termination

Working Principles

The DS26C31TN/NOPB is a differential line transceiver that converts TTL/CMOS logic levels to differential output signals. It operates by receiving TTL/CMOS level inputs on the A and B pins, and then converting them into differential outputs on the Y and Z pins. The device uses internal circuitry to provide high-speed data transmission while consuming low power.

Detailed Application Field Plans

The DS26C31TN/NOPB is commonly used in various applications, including:

  1. Industrial Automation: Used for reliable data transmission in industrial control systems.
  2. Telecommunications: Enables high-speed data transfer in telecommunication networks.
  3. Automotive Electronics: Facilitates communication between different electronic modules in vehicles.
  4. Medical Equipment: Provides robust data transmission in medical devices and instruments.
  5. Networking: Supports data communication in networking equipment and infrastructure.

Alternative Models

Here are some alternative models that can be considered as alternatives to the DS26C31TN/NOPB:

  1. SN75176 - Differential Bus Transceiver
  2. MAX485 - Low-Power RS-485/RS-422 Transceiver
  3. LTC2850 - 20Mbps RS485/RS422 Transceiver
  4. ADM2483 - Isolated RS-485 Transceiver
  5. SP3485 - Half-Duplex RS-485 Transceiver

These alternative models offer similar functionality and can be used as replacements depending on specific requirements.

In conclusion, the DS26C31TN/NOPB is a high-speed, low-power differential line transceiver used for converting TTL/CMOS logic levels to differential output signals. It finds applications in various industries such as industrial automation, telecommunications, automotive electronics, medical equipment, and networking. While it has advantages like high-speed data transmission and low power consumption, it also has limitations such as limited input threshold range and the need for external termination resistors. Alternative models like SN75176, MAX485, LTC2850, ADM2483, and SP3485 can be considered based on specific needs.

10 سوال و پاسخ رایج مربوط به کاربرد DS26C31TN/NOPB در راه حل های فنی را فهرست کنید

  1. What is the maximum data rate supported by DS26C31TN/NOPB?
    - The maximum data rate supported by DS26C31TN/NOPB is 20 Mbps.

  2. What is the operating voltage range for DS26C31TN/NOPB?
    - The operating voltage range for DS26C31TN/NOPB is +4.5V to +5.5V.

  3. Can DS26C31TN/NOPB be used in industrial applications?
    - Yes, DS26C31TN/NOPB is suitable for use in industrial applications.

  4. What is the typical output voltage swing of DS26C31TN/NOPB?
    - The typical output voltage swing of DS26C31TN/NOPB is ±3V.

  5. Is DS26C31TN/NOPB compatible with TTL and CMOS logic levels?
    - Yes, DS26C31TN/NOPB is compatible with both TTL and CMOS logic levels.

  6. Does DS26C31TN/NOPB have built-in ESD protection?
    - Yes, DS26C31TN/NOPB has built-in ESD protection.

  7. What is the recommended operating temperature range for DS26C31TN/NOPB?
    - The recommended operating temperature range for DS26C31TN/NOPB is -40°C to +85°C.

  8. Can DS26C31TN/NOPB be used in RS-422 and RS-485 applications?
    - Yes, DS26C31TN/NOPB can be used in both RS-422 and RS-485 applications.

  9. What is the package type of DS26C31TN/NOPB?
    - DS26C31TN/NOPB is available in a 16-pin SOIC package.

  10. Is DS26C31TN/NOPB RoHS compliant?
    - Yes, DS26C31TN/NOPB is RoHS compliant.