VNQ830P-E

Product Overview

Category: Integrated Circuit (IC)

Use: The VNQ830P-E is a power driver IC designed for automotive applications. It is specifically used for driving resistive, inductive, and capacitive loads.

Characteristics: - High current capability - Low quiescent current - Overtemperature protection - Short-circuit protection - ESD protection

Package: The VNQ830P-E is available in a PowerSSO-36 package, which provides excellent thermal performance and high power dissipation.

Essence: This IC is essential for controlling various loads in automotive systems, ensuring efficient and reliable operation.

Packaging/Quantity: The VNQ830P-E is typically sold in reels containing 250 units per reel.

Specifications

• Supply voltage range: 5V to 36V
• Output current: Up to 30A
• Operating temperature range: -40°C to +150°C
• Standby current: 10µA (max)
• RDS(on) resistance: 19mΩ (typ)

Detailed Pin Configuration

The VNQ830P-E features a PowerSSO-36 package with the following pin configuration:

1. IN1: Input control signal 1
2. GND: Ground reference
3. OUT1: Output 1
4. VCC: Positive supply voltage
5. IN2: Input control signal 2
6. OUT2: Output 2
7. IN3: Input control signal 3
8. OUT3: Output 3
9. IN4: Input control signal 4
10. OUT4: Output 4
11. IN5: Input control signal 5
12. OUT5: Output 5
13. IN6: Input control signal 6
14. OUT6: Output 6
15. IN7: Input control signal 7
16. OUT7: Output 7
17. IN8: Input control signal 8
18. OUT8: Output 8
19. VBB: Bootstrap voltage supply
20. GND: Ground reference
21. IN9: Input control signal 9
22. OUT9: Output 9
23. IN10: Input control signal 10
24. OUT10: Output 10
25. IN11: Input control signal 11
26. OUT11: Output 11
27. IN12: Input control signal 12
28. OUT12: Output 12
29. IN13: Input control signal 13
30. OUT13: Output 13
31. IN14: Input control signal 14
32. OUT14: Output 14
33. IN15: Input control signal 15
34. OUT15: Output 15
35. IN16: Input control signal 16
36. OUT16: Output 16

Functional Features

• High current driving capability for various loads
• Low standby current consumption, ensuring energy efficiency
• Overtemperature protection prevents damage due to excessive heat
• Short-circuit protection safeguards the IC and connected components
• ESD protection guards against electrostatic discharge, enhancing reliability

Advantages and Disadvantages

Advantages: - High current capability allows for driving demanding loads - Wide operating temperature range enables usage in extreme conditions - Comprehensive protection features enhance system reliability - Compact PowerSSO-36 package facilitates efficient thermal dissipation

Disadvantages: - Limited number of input control signals (16) - May require additional external components for certain applications

Working Principles

The VNQ830P-E operates by receiving input control signals that determine the state of each output channel. These control signals are used to activate or deactivate the corresponding outputs, allowing the IC to drive various loads. The IC incorporates protection mechanisms such as overtemperature and short-circuit protection to ensure safe operation.

Detailed Application Field Plans

The VNQ830P-E is widely used in automotive applications, including but not limited to: - Automotive lighting systems - Motor control for power windows and mirrors - HVAC (Heating, Ventilation, and Air Conditioning) systems - Electric power steering systems - Engine management systems

Detailed and Complete Alternative Models

1. VNQ820-E: Similar to VNQ830P-E but with 8 output channels instead of 16.
2. VNQ840-E: Similar to VNQ830P-E but with 40A output current capability.
3. VNQ850-E: Similar to VNQ830P-E but with extended temperature range (-40°C to +175°C).

These alternative models provide flexibility in choosing the appropriate IC based on specific application requirements.

---

Word count: 570 words