The M74HCT574RM13TR has a total of 20 pins arranged as follows:
Advantages: - Reliable and efficient flip-flop IC - High-speed operation - Low power consumption - Versatile functionality with clock enable and output enable inputs
Disadvantages: - Limited operating voltage range (4.5V to 5.5V) - Propagation delay time may affect timing-sensitive applications
The M74HCT574RM13TR is an octal D-type flip-flop that operates on positive-edge triggering. It stores data at the input pins (D0-D7) when a rising edge is detected at the clock input (CP). The stored data is then available at the corresponding output pins (Q0-Q7). The flip-flop can be asynchronously reset using the master reset input (MR), and its operation can be controlled using the clock enable input (CE) and output enable input (OE).
The M74HCT574RM13TR is commonly used in various digital circuit applications, including but not limited to:
These alternative models offer similar functionality and can be used as replacements for the M74HCT574RM13TR in various applications.
Word count: 409 words
Sure! Here are 10 common questions and answers related to the application of M74HCT574RM13TR in technical solutions:
Q: What is the M74HCT574RM13TR? A: The M74HCT574RM13TR is a high-speed CMOS octal D-type flip-flop with 3-state outputs.
Q: What is the operating voltage range for the M74HCT574RM13TR? A: The operating voltage range for this IC is typically between 4.5V and 5.5V.
Q: What is the maximum clock frequency supported by the M74HCT574RM13TR? A: The maximum clock frequency supported by this IC is typically 70 MHz.
Q: Can the M74HCT574RM13TR be used in both parallel and serial data transfer applications? A: Yes, this IC can be used in both parallel and serial data transfer applications.
Q: What is the output drive capability of the M74HCT574RM13TR? A: The output drive capability of this IC is typically 6 mA.
Q: Does the M74HCT574RM13TR have internal pull-up or pull-down resistors? A: No, this IC does not have internal pull-up or pull-down resistors.
Q: Can the M74HCT574RM13TR be cascaded to increase the number of flip-flops? A: Yes, multiple M74HCT574RM13TR ICs can be cascaded to increase the number of flip-flops.
Q: What is the power consumption of the M74HCT574RM13TR? A: The power consumption of this IC is typically low, making it suitable for battery-powered applications.
Q: Does the M74HCT574RM13TR have built-in protection against electrostatic discharge (ESD)? A: Yes, this IC has built-in ESD protection to ensure reliability in real-world applications.
Q: What is the package type of the M74HCT574RM13TR? A: The M74HCT574RM13TR is available in a 20-pin SOIC (Small Outline Integrated Circuit) package.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for the M74HCT574RM13TR.