تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
M74HC73TTR

M74HC73TTR

Product Overview

Category

M74HC73TTR belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronic circuits for various applications.

Characteristics

  • High-speed operation
  • Wide operating voltage range
  • Low power consumption
  • Compatibility with TTL levels
  • Schmitt trigger inputs for noise immunity

Package

M74HC73TTR is available in a small outline package (SOP) format.

Essence

The essence of M74HC73TTR lies in its ability to provide reliable and efficient digital circuit functionality.

Packaging/Quantity

This IC is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 2V to 6V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +125°C
  • Logic Family: HC
  • Number of Pins: 14

Detailed Pin Configuration

  1. CLR (Clear)
  2. CP (Clock Pulse)
  3. D0 (Data Input 0)
  4. D1 (Data Input 1)
  5. Q0 (Output 0)
  6. Q1 (Output 1)
  7. GND (Ground)
  8. Q2 (Output 2)
  9. Q3 (Output 3)
  10. D2 (Data Input 2)
  11. D3 (Data Input 3)
  12. MR (Master Reset)
  13. VCC (Supply Voltage)
  14. NC (No Connection)

Functional Features

  • Dual 4-bit transparent latch
  • Asynchronous master reset
  • Positive-edge triggered clock input
  • Direct overriding clear input
  • Outputs can drive up to 10 LSTTL loads

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient digital circuit design.
  • Wide operating voltage range enables compatibility with various power supply configurations.
  • Low power consumption contributes to energy efficiency.
  • Schmitt trigger inputs provide noise immunity, ensuring reliable performance.

Disadvantages

  • Limited number of output pins may restrict the complexity of certain circuit designs.
  • Availability and pricing may vary depending on market demand.

Working Principles

M74HC73TTR operates as a dual 4-bit transparent latch. It latches the input data when the clock pulse (CP) signal transitions from low to high. The latch can be cleared using the clear (CLR) input or asynchronously reset using the master reset (MR) input. The outputs (Q0-Q3) reflect the state of the corresponding data inputs (D0-D3) when the latch is enabled by the clock pulse.

Detailed Application Field Plans

M74HC73TTR finds applications in various digital electronic circuits, including but not limited to: - Data storage systems - Address decoding - Multiplexing - Counters - Registers

Detailed and Complete Alternative Models

  1. SN74HC73N: Similar functionality, available in DIP package format.
  2. CD74HC73E: Equivalent latch IC, available in SOIC package format.
  3. MC74HC73AD: Alternative model with enhanced ESD protection, available in TSSOP package format.

These alternative models offer similar features and can be used as substitutes for M74HC73TTR based on specific requirements and availability.

Word count: 447 words

10 سوال و پاسخ رایج مربوط به کاربرد M74HC73TTR در راه حل های فنی را فهرست کنید

Sure! Here are 10 common questions and answers related to the application of M74HC73TTR in technical solutions:

  1. Q: What is the M74HC73TTR? A: The M74HC73TTR is a dual JK flip-flop integrated circuit (IC) that can store one bit of data.

  2. Q: What is the purpose of using the M74HC73TTR in technical solutions? A: The M74HC73TTR is commonly used for sequential logic applications, such as counters, registers, and state machines.

  3. Q: What is the power supply voltage range for the M74HC73TTR? A: The M74HC73TTR operates within a power supply voltage range of 2V to 6V.

  4. Q: How many flip-flops are there in the M74HC73TTR? A: The M74HC73TTR contains two independent JK flip-flops.

  5. Q: What is the maximum clock frequency supported by the M74HC73TTR? A: The M74HC73TTR can operate at a maximum clock frequency of 25 MHz.

  6. Q: Can the M74HC73TTR be cascaded to create larger counters or registers? A: Yes, multiple M74HC73TTR ICs can be cascaded together to create larger counters or registers.

  7. Q: Does the M74HC73TTR have any built-in preset or clear functionality? A: No, the M74HC73TTR does not have any built-in preset or clear functionality.

  8. Q: What is the output drive capability of the M74HC73TTR? A: The M74HC73TTR has a typical output drive capability of 5.2 mA.

  9. Q: Can the M74HC73TTR be used in both TTL and CMOS logic systems? A: Yes, the M74HC73TTR is compatible with both TTL and CMOS logic systems.

  10. Q: What is the package type for the M74HC73TTR? A: The M74HC73TTR is available in a standard 14-pin TSSOP (Thin Shrink Small Outline Package) package.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for the M74HC73TTR IC.