M74HC273B1R belongs to the category of integrated circuits (ICs).
This IC is commonly used in digital electronics applications for storing and manipulating binary data.
M74HC273B1R is available in a standard 20-pin plastic dual in-line package (DIP).
The essence of M74HC273B1R lies in its ability to store and process digital information efficiently.
This IC is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
__ __
| 1|__|20|
| 2 19|
| 3 18|
| 4 17|
| 5 16|
| 6 15|
| 7 14|
| 8 13|
| 9 12|
|10 11|
‾‾ ‾‾
M74HC273B1R operates based on the principles of digital logic. It uses flip-flops to store binary information and performs operations based on clock signals and input control signals. The clear input and master reset input allow for resetting the stored data when necessary. The buffered outputs provide the processed data to external circuitry for further use.
M74HC273B1R finds applications in various fields, including: 1. Microcontrollers 2. Data storage systems 3. Communication devices 4. Industrial automation 5. Automotive electronics
Some alternative models that offer similar functionality to M74HC273B1R are: 1. SN74HC273N by Texas Instruments 2. CD74HC273E by Texas Instruments 3. 74HC273D by NXP Semiconductors 4. MC74HC273AN by ON Semiconductor 5. DM74HC273WM by Fairchild Semiconductor
These alternative models can be considered based on specific requirements and availability.
Word count: 410 words
Sure! Here are 10 common questions and answers related to the application of M74HC273B1R in technical solutions:
Q1: What is the M74HC273B1R? A1: The M74HC273B1R is a high-speed octal D-type flip-flop with reset, manufactured by STMicroelectronics.
Q2: What is the purpose of the M74HC273B1R? A2: The M74HC273B1R is used as a storage element in digital circuits. It can store and control the state of eight individual bits.
Q3: What is the maximum clock frequency supported by the M74HC273B1R? A3: The M74HC273B1R can operate at a maximum clock frequency of 74 MHz.
Q4: How many inputs and outputs does the M74HC273B1R have? A4: The M74HC273B1R has eight inputs (D0-D7), eight outputs (Q0-Q7), and two additional inputs for clock and reset.
Q5: What is the voltage supply range for the M74HC273B1R? A5: The M74HC273B1R operates within a voltage supply range of 2V to 6V.
Q6: Can the M74HC273B1R be cascaded to increase the number of bits stored? A6: Yes, multiple M74HC273B1R flip-flops can be cascaded together to increase the number of bits stored.
Q7: Does the M74HC273B1R support edge-triggered or level-triggered operation? A7: The M74HC273B1R supports positive-edge triggered operation, where the output changes on the rising edge of the clock signal.
Q8: What is the power consumption of the M74HC273B1R? A8: The power consumption of the M74HC273B1R is typically low, making it suitable for battery-powered applications.
Q9: Can the M74HC273B1R be used in both synchronous and asynchronous systems? A9: Yes, the M74HC273B1R can be used in both synchronous and asynchronous systems, depending on the application requirements.
Q10: Are there any specific precautions to consider when using the M74HC273B1R? A10: It is important to ensure proper decoupling and bypass capacitors are used near the power supply pins to minimize noise and voltage fluctuations. Additionally, care should be taken to avoid exceeding the maximum ratings specified in the datasheet.
Please note that these answers are general and may vary based on specific application requirements and circuit design considerations.