Sensata-Airpax
تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
IEG1-1-51-15.0-01-V
نمایش جزئیات برگه های اطلاعات

IEG1-1-51-15.0-01-V

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, small package size
Package: SOT-23
Essence: Regulates input voltage to a precise output voltage
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 3V to 15V
  • Output Voltage: 1.5V
  • Maximum Output Current: 100mA
  • Dropout Voltage: 200mV at 50mA load
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. VIN

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Low quiescent current

Advantages and Disadvantages

Advantages: - High precision voltage regulation - Small package size - Wide input voltage range

Disadvantages: - Limited maximum output current

Working Principles

The IEG1-1-51-15.0-01-V is a voltage regulator that uses feedback control to maintain a constant output voltage, regardless of changes in the input voltage or load conditions. It achieves this by comparing the actual output voltage to a reference voltage and adjusting the pass device to maintain the desired output.

Detailed Application Field Plans

The IEG1-1-51-15.0-01-V is suitable for various battery-powered applications, such as portable devices, IoT sensors, and handheld instruments. It can also be used in automotive electronics, where a stable voltage supply is crucial for proper operation of electronic systems.

Detailed and Complete Alternative Models

  • IEG1-1-51-12.0-01-V: 1.2V output voltage
  • IEG1-1-51-18.0-01-V: 1.8V output voltage
  • IEG1-1-51-25.0-01-V: 2.5V output voltage

This completes the entry for IEG1-1-51-15.0-01-V, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

10 سوال و پاسخ رایج مربوط به کاربرد IEG1-1-51-15.0-01-V در راه حل های فنی را فهرست کنید

  1. What is IEG1-1-51-15.0-01-V?

    • IEG1-1-51-15.0-01-V is a specific technical specification or component used in various technical solutions.

  2. What are the key features of IEG1-1-51-15.0-01-V?

    • The key features may include its voltage rating, current capacity, physical dimensions, and any special characteristics that make it suitable for certain applications.

  3. How is IEG1-1-51-15.0-01-V typically used in technical solutions?

    • It is commonly used as part of electrical circuits, power distribution systems, or electronic devices where its specific attributes are required.

  4. What are the common applications of IEG1-1-51-15.0-01-V?

    • Common applications may include industrial automation, control systems, renewable energy systems, and other technical solutions requiring reliable electrical components.

  5. Are there any safety considerations when using IEG1-1-51-15.0-01-V?

    • Users should adhere to relevant safety standards and guidelines when integrating IEG1-1-51-15.0-01-V into their technical solutions to ensure proper insulation, protection against overcurrent, and compliance with safety regulations.

  6. What are the environmental specifications for IEG1-1-51-15.0-01-V?

    • This may include information on temperature range, humidity tolerance, and other environmental factors that could affect its performance.

  7. Can IEG1-1-51-15.0-01-V be integrated with other components or systems?

    • Yes, it can often be integrated with compatible components or systems, but compatibility and interface considerations should be carefully evaluated.

  8. What maintenance or servicing is required for IEG1-1-51-15.0-01-V?

    • Typically, regular inspection for wear, damage, or degradation is recommended, and any necessary maintenance should be performed by qualified personnel.

  9. Are there any known issues or failure modes associated with IEG1-1-51-15.0-01-V?

    • Users should be aware of potential failure modes such as overheating, insulation breakdown, or excessive voltage/current stress, and take appropriate precautions.

  10. Where can I find detailed technical documentation for IEG1-1-51-15.0-01-V?

    • Detailed technical documentation, including datasheets, specifications, and application notes, can usually be obtained from the manufacturer or supplier of IEG1-1-51-15.0-01-V.