تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
P6SMB11CAT3

P6SMB11CAT3

Product Overview

Category

The P6SMB11CAT3 belongs to the category of transient voltage suppressor (TVS) diodes.

Use

It is used to protect sensitive electronic components from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.

Characteristics

  • Fast response time
  • Low clamping voltage
  • High surge current capability

Package

The P6SMB11CAT3 is available in a DO-214AA (SMB) package.

Essence

The essence of the P6SMB11CAT3 lies in its ability to provide reliable overvoltage protection for electronic circuits.

Packaging/Quantity

It is typically packaged in reels or tubes and is available in quantities ranging from hundreds to thousands per reel/tube.

Specifications

  • Standoff Voltage: 9.72V
  • Breakdown Voltage: 10.8V
  • Maximum Clamping Voltage: 17.0V
  • Peak Pulse Current: 53.5A
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The P6SMB11CAT3 has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Bi-directional TVS diode
  • Low incremental surge resistance
  • RoHS compliant

Advantages and Disadvantages

Advantages

  • Fast response time protects against transient voltage spikes
  • Low clamping voltage ensures minimal impact on protected circuits
  • High surge current capability provides robust protection

Disadvantages

  • May require additional circuitry for comprehensive overvoltage protection in complex systems
  • Sensitive to reverse bias conditions if not properly installed

Working Principles

When a transient voltage spike occurs, the P6SMB11CAT3 conducts the excess energy to ground, limiting the voltage across the protected circuit.

Detailed Application Field Plans

The P6SMB11CAT3 is commonly used in the following applications: - Telecommunication equipment - Industrial control systems - Automotive electronics - Power supplies - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the P6SMB11CAT3 include: - P6SMB6.8CAT3 - P6SMB15CAT3 - P6SMB24CAT3 - P6SMB33CAT3

In conclusion, the P6SMB11CAT3 is a vital component in safeguarding electronic devices from voltage transients, offering fast response times and high surge current capabilities. Its application spans across various industries, making it an essential part of modern electronic systems.

[Word count: 398]

10 سوال و پاسخ رایج مربوط به کاربرد P6SMB11CAT3 در راه حل های فنی را فهرست کنید

  1. What is the maximum peak pulse power of P6SMB11CAT3?

    • The maximum peak pulse power of P6SMB11CAT3 is 600 watts.
  2. What is the breakdown voltage of P6SMB11CAT3?

    • The breakdown voltage of P6SMB11CAT3 is 12.8 volts.
  3. What is the typical clamping voltage of P6SMB11CAT3?

    • The typical clamping voltage of P6SMB11CAT3 is 18.2 volts.
  4. What are the applications of P6SMB11CAT3 in technical solutions?

    • P6SMB11CAT3 is commonly used for transient voltage suppression in various electronic equipment such as computers, telecommunication equipment, and consumer electronics.
  5. What is the operating temperature range of P6SMB11CAT3?

    • The operating temperature range of P6SMB11CAT3 is -55°C to +150°C.
  6. What is the package type of P6SMB11CAT3?

    • P6SMB11CAT3 comes in a DO-214AA (SMB) package.
  7. What is the reverse stand-off voltage of P6SMB11CAT3?

    • The reverse stand-off voltage of P6SMB11CAT3 is 9.4 volts.
  8. Is P6SMB11CAT3 RoHS compliant?

    • Yes, P6SMB11CAT3 is RoHS compliant, making it suitable for use in environmentally sensitive applications.
  9. What is the response time of P6SMB11CAT3?

    • The response time of P6SMB11CAT3 is very fast, typically responding within nanoseconds to transient voltage spikes.
  10. Can P6SMB11CAT3 be used for surge protection in power supply units?

    • Yes, P6SMB11CAT3 is suitable for surge protection in power supply units, providing reliable overvoltage protection for sensitive components.