MC74HC589ANG belongs to the category of integrated circuits (ICs).
This product is commonly used in digital electronics for data storage and retrieval purposes.
MC74HC589ANG is available in a 16-pin DIP (Dual In-line Package) format.
The essence of MC74HC589ANG lies in its ability to store and retrieve digital information efficiently.
This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
MC74HC589ANG operates based on the principles of shift registers and storage registers. It receives serial data input and converts it into parallel data, which can be stored in the internal storage register. The stored data can then be retrieved and converted back into serial form for further processing or transmission.
The clock input controls the shifting of data through the shift register, while the storage register clock input enables the transfer of data from the shift register to the storage register. The master reset input clears the storage register, allowing for a fresh start.
MC74HC589ANG finds application in various fields, including but not limited to: - Data communication systems - Digital signal processing - Industrial automation - Instrumentation and measurement devices - Consumer electronics
These alternative models offer similar features and can be used as substitutes for MC74HC589ANG in various applications.
Word count: 511 words
Sure! Here are 10 common questions and answers related to the application of MC74HC589ANG in technical solutions:
Q: What is MC74HC589ANG? A: MC74HC589ANG is a high-speed CMOS 8-bit shift register with output latches.
Q: What is the purpose of MC74HC589ANG? A: MC74HC589ANG is used for serial-to-parallel data conversion, storage, and retrieval in various digital applications.
Q: What is the maximum clock frequency supported by MC74HC589ANG? A: The maximum clock frequency supported by MC74HC589ANG is typically around 25 MHz.
Q: How many parallel outputs does MC74HC589ANG have? A: MC74HC589ANG has 8 parallel outputs, which can be used to drive external devices or interface with other components.
Q: Can MC74HC589ANG be cascaded to increase the number of bits? A: Yes, MC74HC589ANG can be cascaded to increase the number of bits by connecting the serial output of one device to the serial input of another.
Q: What is the power supply voltage range for MC74HC589ANG? A: The power supply voltage range for MC74HC589ANG is typically between 2V and 6V.
Q: Does MC74HC589ANG support tri-state outputs? A: Yes, MC74HC589ANG supports tri-state outputs, allowing the outputs to be disabled when not needed.
Q: What is the typical propagation delay of MC74HC589ANG? A: The typical propagation delay of MC74HC589ANG is around 15 ns.
Q: Can MC74HC589ANG be used in both parallel and serial data transfer modes? A: Yes, MC74HC589ANG can be used in both parallel and serial data transfer modes, depending on the application requirements.
Q: What are some common applications of MC74HC589ANG? A: Some common applications of MC74HC589ANG include data storage, address decoding, LED matrix control, and general-purpose digital logic circuits.
Please note that the answers provided here are general and may vary based on specific datasheet specifications and application requirements.