The MC74HC175AN has a total of 16 pins arranged as follows:
__ __
Q1 |1 U 16| Vcc
Q2 |2 15| Q0
Q3 |3 14| CLR
Q4 |4 13| CP
GND |5 12| D0
D3 |6 11| D1
D2 |7 10| D2
CLK |8 9| D3
¯¯ ¯¯
The MC74HC175AN operates based on the principles of D-type flip-flops. Each flip-flop stores a single bit of data and can be controlled independently. The clock input (CP) triggers the transfer of data from the D inputs to the Q outputs. The clear input (CLR) resets all flip-flops when activated, forcing their outputs to a low state.
The MC74HC175AN can be used in various applications that require the storage and transfer of digital data. Some potential application fields include:
These alternative models offer similar functionality to the MC74HC175AN and can be considered as substitutes based on specific requirements.
Word count: 446 words
Sure! Here are 10 common questions and answers related to the application of MC74HC175AN in technical solutions:
Q: What is MC74HC175AN? A: MC74HC175AN is a quad D-type flip-flop integrated circuit (IC) that can store and manipulate digital data.
Q: What is the purpose of using MC74HC175AN in technical solutions? A: MC74HC175AN is commonly used for data storage, synchronization, and sequential logic applications in various electronic systems.
Q: What is the voltage supply range for MC74HC175AN? A: MC74HC175AN operates within a voltage supply range of 2V to 6V.
Q: How many flip-flops are there in MC74HC175AN? A: MC74HC175AN consists of four independent D-type flip-flops.
Q: What is the maximum clock frequency supported by MC74HC175AN? A: MC74HC175AN can operate at a maximum clock frequency of 25 MHz.
Q: Can MC74HC175AN be used in both synchronous and asynchronous modes? A: Yes, MC74HC175AN can be used in both synchronous and asynchronous modes depending on the application requirements.
Q: What is the output drive capability of MC74HC175AN? A: MC74HC175AN has a standard output drive capability of 4 mA.
Q: Is MC74HC175AN compatible with other logic families? A: Yes, MC74HC175AN is compatible with other CMOS logic families and can interface with TTL logic devices.
Q: What is the operating temperature range for MC74HC175AN? A: MC74HC175AN can operate within a temperature range of -40°C to 85°C.
Q: Can MC74HC175AN be used in battery-powered applications? A: Yes, MC74HC175AN is suitable for battery-powered applications due to its low power consumption characteristics.
Please note that these answers are general and may vary depending on the specific application and requirements.