Omron Automation and Safety
تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
MS46SR-14-520-Q2-R-NC-FN

MS46SR-14-520-Q2-R-NC-FN

Introduction

The MS46SR-14-520-Q2-R-NC-FN is a precision rotary position sensor designed for use in industrial and automotive applications. This entry provides an overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Precision Rotary Position Sensor
  • Use: Industrial and Automotive Applications
  • Characteristics: High precision, durability, and reliability
  • Package: Sealed housing for protection against environmental factors
  • Essence: Accurate measurement of rotary position
  • Packaging/Quantity: Customizable based on customer requirements

Specifications

  • Model: MS46SR-14-520-Q2-R-NC-FN
  • Operating Voltage: 5V to 24V
  • Output Signal: Analog or Digital
  • Resolution: 12-bit or higher
  • Operating Temperature: -40°C to 125°C
  • Protection Rating: IP67
  • Interface: SPI, I2C, or PWM

Detailed Pin Configuration

The MS46SR-14-520-Q2-R-NC-FN features a 6-pin configuration: 1. VCC 2. GND 3. Signal Output 4. NC (Not Connected) 5. FN (Function Select) 6. Reference Voltage

Functional Features

  • High Precision: Provides accurate measurement of rotary position with minimal error.
  • Non-Contact Sensing: Utilizes non-contact sensing technology for enhanced reliability and longevity.
  • Customizable Output: Offers flexibility in output signal type and interface for seamless integration with various systems.
  • Environmental Protection: Sealed housing ensures resistance to dust, moisture, and other environmental factors.

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Robust construction for durability
  • Versatile output signal options
  • Reliable performance in harsh environments

Disadvantages

  • Higher cost compared to standard rotary sensors
  • Requires careful handling during installation and maintenance

Working Principles

The MS46SR-14-520-Q2-R-NC-FN operates based on the principle of measuring the angular position of a rotating shaft using advanced sensing technology. It employs a non-contact method to detect the position, ensuring minimal wear and tear over time.

Detailed Application Field Plans

The MS46SR-14-520-Q2-R-NC-FN is suitable for a wide range of applications, including: - Automotive throttle position sensing - Industrial robotics and automation - Steering angle measurement in vehicles - Actuator position feedback in machinery - Wind turbine blade pitch control

Detailed and Complete Alternative Models

  1. MS36SR-10-420-Q1-R-NC-FN
    • Similar precision rotary position sensor with lower resolution
    • Suitable for cost-sensitive applications
  2. MS56SR-18-620-Q3-R-NC-FN
    • Higher-resolution version of the MS46SR series
    • Ideal for applications requiring ultra-high precision

In conclusion, the MS46SR-14-520-Q2-R-NC-FN offers exceptional precision and reliability for industrial and automotive rotary position sensing applications. Its advanced features and customizable options make it a versatile choice for demanding environments.

[Word Count: 529]

10 سوال و پاسخ رایج مربوط به کاربرد MS46SR-14-520-Q2-R-NC-FN در راه حل های فنی را فهرست کنید

  1. What is the MS46SR-14-520-Q2-R-NC-FN?

    • The MS46SR-14-520-Q2-R-NC-FN is a specific model of stepper motor with a 1.8° step angle and a holding torque of 52 Ncm.

  2. What are the typical applications for the MS46SR-14-520-Q2-R-NC-FN?

    • This stepper motor is commonly used in 3D printers, CNC machines, robotics, and other automated equipment.

  3. What is the voltage and current rating for the MS46SR-14-520-Q2-R-NC-FN?

    • The voltage rating is typically 2.8V and the current rating is around 2.0A per phase.

  4. Does the MS46SR-14-520-Q2-R-NC-FN require any special drivers or controllers?

    • Yes, it requires a compatible stepper motor driver or controller to operate effectively.

  5. What type of shaft does the MS46SR-14-520-Q2-R-NC-FN have?

    • It has a single shaft with a diameter of 5mm, suitable for coupling with various mechanical components.

  6. Is the MS46SR-14-520-Q2-R-NC-FN suitable for high-speed applications?

    • While it can achieve moderate speeds, it is more commonly used for applications requiring precise positioning rather than high speed.

  7. Can the MS46SR-14-520-Q2-R-NC-FN be used in harsh environments?

    • It is not specifically designed for harsh environments, so additional protection may be required if used in such conditions.

  8. What is the temperature range for the MS46SR-14-520-Q2-R-NC-FN?

    • The operating temperature range is typically between -20°C to +50°C.

  9. Are there any recommended maintenance procedures for the MS46SR-14-520-Q2-R-NC-FN?

    • Regular inspection for wear and tear, as well as proper lubrication of moving parts, is recommended for optimal performance and longevity.

  10. Where can I find detailed technical specifications for the MS46SR-14-520-Q2-R-NC-FN?

    • Detailed technical specifications can be found in the product datasheet provided by the manufacturer or supplier.