Nuvoton Technology Corporation of America
تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
W6810IR
نمایش جزئیات برگه های اطلاعات

W6810IR Product Overview

Introduction

The W6810IR is a versatile integrated circuit that belongs to the category of infrared remote control transmitters. This device is widely used in various electronic applications for transmitting infrared signals to control appliances and devices.

Basic Information Overview

  • Category: Infrared Remote Control Transmitter IC
  • Use: Transmitting infrared signals for remote control applications
  • Characteristics: Low power consumption, compact size, wide operating voltage range
  • Package: Integrated circuit (IC)
  • Essence: Transmitting infrared signals with high reliability and accuracy
  • Packaging/Quantity: Typically available in tape and reel packaging with varying quantities

Specifications

The W6810IR features the following specifications: - Operating Voltage: 2.7V to 5.5V - Carrier Frequency: 38kHz - Transmission Range: Up to 10 meters - Standby Current: <1μA - Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The W6810IR has a standard pin configuration with the following key pins: 1. VCC: Power supply input 2. GND: Ground connection 3. OUT: Output pin for the modulated infrared signal 4. NC: No connection

Functional Features

  • Modulated Infrared Signal Generation
  • Low Power Consumption
  • Wide Operating Voltage Range
  • Compact Size for Integration into Various Devices

Advantages and Disadvantages

Advantages

  • Reliable Infrared Signal Transmission
  • Low Standby Current for Power Efficiency
  • Compact Size for Space-Constrained Applications

Disadvantages

  • Limited Transmission Range for Long-Distance Applications
  • Sensitivity to Ambient Infrared Interference

Working Principles

The W6810IR operates by generating a modulated infrared signal based on the input control signals. It utilizes low power consumption techniques to ensure efficient operation while transmitting accurate and reliable infrared signals.

Detailed Application Field Plans

The W6810IR finds extensive application in various electronic devices and appliances, including: - Television and Set-Top Boxes - Air Conditioners and HVAC Systems - Audio Equipment and Home Theater Systems - Remote Control Toys and Gadgets

Detailed and Complete Alternative Models

For users seeking alternative options, the following integrated circuits can be considered as alternatives to the W6810IR: 1. TSOP38238: A similar infrared receiver module with high sensitivity 2. IRM-3638: Integrated IR control transmitter with extended transmission range 3. SFH5110: Infrared transmitter IC with enhanced noise immunity

In conclusion, the W6810IR offers a reliable and efficient solution for transmitting infrared signals in various electronic applications, despite its limitations in long-distance transmission and susceptibility to ambient infrared interference.

[Word Count: 396]

10 سوال و پاسخ رایج مربوط به کاربرد W6810IR در راه حل های فنی را فهرست کنید

  1. What is the W6810IR?

    • The W6810IR is a high-performance infrared sensor module used for detecting motion and presence in various technical solutions.

  2. How does the W6810IR work?

    • The W6810IR works by detecting changes in infrared radiation within its field of view, which are then processed to determine motion or presence.

  3. What is the detection range of the W6810IR?

    • The detection range of the W6810IR can vary based on environmental factors, but it typically has a range of up to 5 meters.

  4. Can the W6810IR be used outdoors?

    • Yes, the W6810IR can be used outdoors as long as it is properly protected from direct exposure to harsh weather conditions.

  5. What power supply does the W6810IR require?

    • The W6810IR typically operates on a 3.3V to 5V DC power supply.

  6. Is the W6810IR suitable for battery-powered applications?

    • Yes, the low power consumption of the W6810IR makes it suitable for battery-powered applications.

  7. What output does the W6810IR provide?

    • The W6810IR typically provides a digital output signal indicating the presence or absence of motion.

  8. Can the W6810IR be integrated with microcontrollers or IoT devices?

    • Yes, the W6810IR can be easily integrated with microcontrollers and IoT devices through its digital output interface.

  9. Does the W6810IR have adjustable sensitivity?

    • Yes, the sensitivity of the W6810IR can often be adjusted to suit specific application requirements.

  10. Are there any special considerations for installing the W6810IR?

    • It is important to mount the W6810IR securely and ensure that it has an unobstructed view of the area to be monitored for optimal performance.