The MT48LC16M16A2P-75 IT:D has a total of 54 pins. The pin configuration is as follows:
Advantages: - High-density memory storage - Fast data transfer rates - Low power consumption - Suitable for various applications requiring high-performance memory
Disadvantages: - Limited compatibility with older systems that do not support DDR architecture - Relatively higher cost compared to other memory options
The MT48LC16M16A2P-75 IT:D is a synchronous dynamic random access memory (SDRAM) device. It operates using a double data rate (DDR) architecture, allowing data to be transferred on both the rising and falling edges of the clock signal. This results in increased data transfer rates and improved overall performance. The memory cells store data in a volatile manner, meaning the data is lost when power is removed. To maintain the stored data, the memory requires periodic refreshing.
The MT48LC16M16A2P-75 IT:D is widely used in various electronic devices and systems that require high-density memory with fast data transfer capabilities. Some of the common application fields include: - Personal computers - Servers - Networking equipment - Telecommunications devices - Consumer electronics (e.g., gaming consoles, digital cameras)
These alternative models offer different memory capacities to suit specific application requirements while maintaining similar characteristics and functionality.
(Note: The above
Question: What is the MT48LC16M16A2P-75 IT:D?
Answer: The MT48LC16M16A2P-75 IT:D is a specific type of memory chip commonly used in technical solutions.
Question: What is the capacity of the MT48LC16M16A2P-75 IT:D?
Answer: The MT48LC16M16A2P-75 IT:D has a capacity of 256 megabits (32 megabytes).
Question: What is the speed rating of the MT48LC16M16A2P-75 IT:D?
Answer: The MT48LC16M16A2P-75 IT:D has a speed rating of 75 nanoseconds.
Question: What is the voltage requirement for the MT48LC16M16A2P-75 IT:D?
Answer: The MT48LC16M16A2P-75 IT:D operates at a voltage of 3.3 volts.
Question: Can the MT48LC16M16A2P-75 IT:D be used in both commercial and industrial applications?
Answer: Yes, the MT48LC16M16A2P-75 IT:D is suitable for both commercial and industrial applications.
Question: Is the MT48LC16M16A2P-75 IT:D compatible with various microcontrollers and processors?
Answer: Yes, the MT48LC16M16A2P-75 IT:D is designed to work with a wide range of microcontrollers and processors.
Question: Does the MT48LC16M16A2P-75 IT:D support synchronous or asynchronous operation?
Answer: The MT48LC16M16A2P-75 IT:D supports synchronous operation.
Question: Can the MT48LC16M16A2P-75 IT:D be used in high-performance computing systems?
Answer: Yes, the MT48LC16M16A2P-75 IT:D is suitable for use in high-performance computing systems.
Question: What is the temperature range for the MT48LC16M16A2P-75 IT:D?
Answer: The MT48LC16M16A2P-75 IT:D can operate within a temperature range of -40°C to +85°C.
Question: Is the MT48LC16M16A2P-75 IT:D readily available in the market?
Answer: Yes, the MT48LC16M16A2P-75 IT:D is a commonly available memory chip and can be easily sourced from various suppliers.