The MT46V16M16CY-5B IT:M memory module has a total of 60 pins. The pin configuration is as follows:
Advantages: - Fast data access and retrieval speeds - Large storage capacity - Low power consumption - Error correction capabilities ensure data integrity
Disadvantages: - Relatively higher cost compared to other memory technologies - Limited lifespan due to the nature of dynamic memory cells
The MT46V16M16CY-5B IT:M memory module operates based on the principles of dynamic random access memory (DRAM). It stores data in a matrix of capacitors, with each capacitor representing a single bit of information. The stored data needs to be periodically refreshed to maintain its integrity. When the device requires access to specific data, it sends a command through the interface, which triggers the necessary operations to retrieve or store the data.
The MT46V16M16CY-5B IT:M memory module is commonly used in various electronic devices, including: - Personal computers - Laptops - Servers - Networking equipment - Mobile devices - Gaming consoles
These alternative models offer similar specifications and functionality to the MT46V16M16CY-5B IT:M memory module.
(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)
Sure! Here are 10 common questions and answers related to the application of MT46V16M16CY-5B IT:M in technical solutions:
Question: What is the capacity of the MT46V16M16CY-5B IT:M memory module?
Answer: The MT46V16M16CY-5B IT:M has a capacity of 256 megabits (Mb) or 32 megabytes (MB).
Question: What is the operating voltage range for this memory module?
Answer: The operating voltage range for the MT46V16M16CY-5B IT:M is 2.5V to 3.3V.
Question: What is the maximum clock frequency supported by this memory module?
Answer: The MT46V16M16CY-5B IT:M supports a maximum clock frequency of 166 MHz.
Question: Is this memory module compatible with DDR2 or DDR3 interfaces?
Answer: The MT46V16M16CY-5B IT:M is compatible with DDR2 SDRAM interfaces.
Question: What is the CAS latency of this memory module?
Answer: The CAS latency of the MT46V16M16CY-5B IT:M is 5 cycles.
Question: Can this memory module be used in both commercial and industrial applications?
Answer: Yes, the MT46V16M16CY-5B IT:M is designed for both commercial and industrial applications.
Question: Does this memory module support ECC (Error Correction Code)?
Answer: No, the MT46V16M16CY-5B IT:M does not support ECC.
Question: What is the package type for this memory module?
Answer: The MT46V16M16CY-5B IT:M comes in a 60-ball FBGA (Fine-Pitch Ball Grid Array) package.
Question: Can this memory module be used in automotive applications?
Answer: Yes, the MT46V16M16CY-5B IT:M is AEC-Q100 qualified and suitable for automotive applications.
Question: What is the temperature range for this memory module?
Answer: The MT46V16M16CY-5B IT:M operates within a temperature range of -40°C to +85°C.
Please note that these answers are based on general information about the MT46V16M16CY-5B IT:M memory module. It's always recommended to refer to the datasheet or consult the manufacturer for specific details and application requirements.