Micron Technology Inc.
تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
MT29F8G08ADBDAH4-IT:D

MT29F8G08ADBDAH4-IT:D

Product Overview

Category: NAND Flash Memory
Use: Data storage in electronic devices
Characteristics: High capacity, non-volatile, fast read/write speeds
Package: Integrated circuit chip
Essence: Stores digital information in a solid-state format
Packaging/Quantity: Individual chip, typically sold in bulk quantities

Specifications

  • Model: MT29F8G08ADBDAH4-IT:D
  • Capacity: 8 gigabytes (GB)
  • Interface: Parallel
  • Voltage: 3.3 volts (V)
  • Access Time: <100 nanoseconds (ns)
  • Operating Temperature: -40°C to +85°C
  • Data Retention: Up to 10 years
  • Endurance: Up to 100,000 program/erase cycles

Pin Configuration

The MT29F8G08ADBDAH4-IT:D has the following pin configuration:

  1. VCC - Power supply voltage
  2. GND - Ground reference
  3. A0-A18 - Address inputs
  4. DQ0-DQ15 - Data inputs/outputs
  5. WE# - Write enable control
  6. CE# - Chip enable control
  7. R/B# - Ready/busy status output
  8. CLE - Command latch enable
  9. ALE - Address latch enable
  10. RE# - Read enable control

Functional Features

  • High-speed data transfer rates
  • Reliable and durable storage solution
  • Low power consumption
  • Error correction capabilities
  • Wear-leveling algorithms for extended lifespan
  • Block erase and page program operations

Advantages and Disadvantages

Advantages: - Large storage capacity - Fast read/write speeds - Non-volatile memory retains data even without power - Compact size and lightweight - Suitable for various electronic devices

Disadvantages: - Limited endurance compared to other storage technologies - Higher cost per gigabyte compared to traditional hard drives

Working Principles

The MT29F8G08ADBDAH4-IT:D utilizes NAND flash memory technology. It stores digital information by trapping electrons in a floating gate, which can be electrically programmed or erased. When reading data, the stored charge is measured to determine the stored information. The device operates based on the principles of electrical charge manipulation within the memory cells.

Detailed Application Field Plans

The MT29F8G08ADBDAH4-IT:D is commonly used in various electronic devices, including:

  1. Smartphones and tablets
  2. Solid-state drives (SSDs)
  3. Digital cameras
  4. Portable media players
  5. Automotive infotainment systems
  6. Industrial control systems
  7. Medical equipment
  8. Gaming consoles

Detailed Alternative Models

Some alternative models to the MT29F8G08ADBDAH4-IT:D include:

  1. Samsung K9GAG08U0E
  2. Toshiba TH58NVG6D2ETA20
  3. Micron MT29F8G08ABABA
  4. Intel JS29F64G08CAMD1
  5. Hynix H27UCG8T2BTR

These models offer similar specifications and functionality, providing options for different application requirements.

Word count: 320 words

10 سوال و پاسخ رایج مربوط به کاربرد MT29F8G08ADBDAH4-IT:D در راه حل های فنی را فهرست کنید

1. What is the MT29F8G08ADBDAH4-IT:D?

The MT29F8G08ADBDAH4-IT:D is a specific model of NAND flash memory chip manufactured by Micron Technology.

2. What is the storage capacity of the MT29F8G08ADBDAH4-IT:D?

The MT29F8G08ADBDAH4-IT:D has a storage capacity of 8 gigabytes (GB).

3. What is the interface used by the MT29F8G08ADBDAH4-IT:D?

The MT29F8G08ADBDAH4-IT:D uses a standard NAND flash interface.

4. What are some common applications of the MT29F8G08ADBDAH4-IT:D?

Common applications of the MT29F8G08ADBDAH4-IT:D include solid-state drives (SSDs), embedded systems, automotive electronics, and industrial control systems.

5. What is the operating voltage range of the MT29F8G08ADBDAH4-IT:D?

The MT29F8G08ADBDAH4-IT:D operates within a voltage range of 2.7V to 3.6V.

6. What is the maximum data transfer rate of the MT29F8G08ADBDAH4-IT:D?

The MT29F8G08ADBDAH4-IT:D supports a maximum data transfer rate of up to 200 megabytes per second (MB/s).

7. Does the MT29F8G08ADBDAH4-IT:D support wear-leveling algorithms?

Yes, the MT29F8G08ADBDAH4-IT:D supports wear-leveling algorithms to ensure even distribution of write/erase cycles across the memory cells, prolonging the lifespan of the chip.

8. Can the MT29F8G08ADBDAH4-IT:D operate in extreme temperature conditions?

Yes, the MT29F8G08ADBDAH4-IT:D is designed to operate reliably in a wide temperature range, typically from -40°C to 85°C.

9. Does the MT29F8G08ADBDAH4-IT:D have built-in error correction capabilities?

Yes, the MT29F8G08ADBDAH4-IT:D features built-in error correction code (ECC) capabilities to detect and correct errors that may occur during data read/write operations.

10. Is the MT29F8G08ADBDAH4-IT:D compatible with various operating systems and file systems?

Yes, the MT29F8G08ADBDAH4-IT:D is compatible with various operating systems and file systems, making it versatile for integration into different technical solutions.