CPC7692BCTR

Product Overview

• Category: Integrated Circuit
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: SOT-23-6
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 1.2V to 3.3V
• Maximum Output Current: 500mA
• Dropout Voltage: 200mV at 100mA
• Quiescent Current: 50µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The CPC7692BCTR has a total of six pins arranged as follows:

1. VIN: Input voltage pin
2. GND: Ground pin
3. EN: Enable pin
4. FB: Feedback pin
5. VOUT: Output voltage pin
6. PG: Power Good pin

Functional Features

• High efficiency power management solution
• Low power consumption for extended battery life
• Wide input voltage range for versatile applications
• Adjustable output voltage for flexibility
• Power Good indicator for system monitoring
• Thermal shutdown protection for enhanced safety

Advantages and Disadvantages

Advantages

• High efficiency leads to reduced power wastage
• Low quiescent current prolongs battery life
• Wide input voltage range allows compatibility with various power sources
• Adjustable output voltage provides versatility in different applications
• Power Good indicator enables easy system monitoring
• Thermal shutdown protection ensures safe operation

Disadvantages

• Limited maximum output current may not be suitable for high-power applications
• Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The CPC7692BCTR is a voltage regulator integrated circuit that converts an input voltage within the range of 2.7V to 5.5V into a regulated output voltage between 1.2V and 3.3V. It achieves this by utilizing a feedback mechanism to adjust the internal circuitry and maintain a stable output voltage despite variations in the input voltage.

When the EN pin is high, the regulator is enabled, and it starts regulating the output voltage. The FB pin provides feedback to the internal circuitry, allowing it to adjust the output voltage based on the desired value set by external components.

The PG pin indicates the status of the output voltage. When the output voltage is within the specified range, the PG pin is high, indicating a "Power Good" state. If the output voltage falls outside the acceptable range, the PG pin goes low, signaling a fault condition.

Detailed Application Field Plans

The CPC7692BCTR is commonly used in various applications where efficient power management is required. Some typical application fields include:

1. Battery-powered devices: Portable electronics, handheld instruments, and wireless sensors benefit from the low power consumption and extended battery life provided by the CPC7692BCTR.
2. IoT (Internet of Things) devices: The wide input voltage range and adjustable output voltage make this IC suitable for powering IoT devices that operate on different power sources.
3. Consumer electronics: Smartphones, tablets, and other consumer electronic devices can utilize the CPC7692BCTR to regulate power efficiently and ensure stable operation.
4. Industrial automation: Control systems, motor drives, and other industrial automation equipment can benefit from the high efficiency and thermal protection features of the CPC7692BCTR.

Detailed and Complete Alternative Models

• CPC7691BCTR
• CPC7693BCTR
• CPC7694BCTR
• CPC7695BCTR
• CPC7696BCTR

These alternative models offer similar functionality and characteristics to the CPC7692BCTR, but with slight variations in specifications or package types. It is recommended to review the datasheets of each alternative model to determine the best fit for specific application requirements.

Word count: 511 words