8N3QV01EG-0161CDI8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Timing and Frequency Control
• Characteristics: High precision, low power consumption
• Package: QFN (Quad Flat No-leads)
• Essence: Clock Generator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Part Number: 8N3QV01EG-0161CDI8
• Supply Voltage: 2.5V to 3.3V
• Output Frequency Range: 10MHz to 1.6GHz
• Output Type: LVPECL (Low Voltage Positive Emitter-Coupled Logic)
• Operating Temperature Range: -40°C to +85°C
• Phase Noise: -150dBc/Hz at 100kHz offset
• Package Size: 4mm x 4mm

Detailed Pin Configuration

The 8N3QV01EG-0161CDI8 IC has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VDD | Power Supply (2.5V to 3.3V) | | 2 | GND | Ground | | 3 | OUT | LVPECL Output | | 4 | NC | No Connection | | 5 | SEL | Frequency Selection | | 6 | OE | Output Enable | | 7 | NC | No Connection | | 8 | VDDO | Output Power Supply |

Functional Features

• Wide frequency range for various applications
• Low phase noise for accurate timing
• Flexible frequency selection through SEL pin
• Output enable/disable control with OE pin
• Small package size for space-constrained designs
• Low power consumption for energy-efficient operation

Advantages and Disadvantages

Advantages

• High precision timing control
• Wide operating temperature range
• Small form factor
• Low power consumption

Disadvantages

• Limited output frequency range
• Requires external power supply

Working Principles

The 8N3QV01EG-0161CDI8 is a clock generator IC that generates precise timing signals for various electronic systems. It operates by utilizing an internal oscillator circuit to generate a stable reference frequency. This frequency is then multiplied and divided to achieve the desired output frequency. The output signal is provided in LVPECL format, which is commonly used in high-speed communication and data transmission applications.

Detailed Application Field Plans

The 8N3QV01EG-0161CDI8 IC finds applications in various fields, including: 1. Telecommunications: Used in base stations, routers, and switches for accurate synchronization of data transmission. 2. Test and Measurement Equipment: Provides precise timing signals for oscilloscopes, spectrum analyzers, and signal generators. 3. Industrial Automation: Used in PLCs (Programmable Logic Controllers) and motion control systems for synchronized operation. 4. Medical Devices: Provides accurate timing for medical imaging equipment, patient monitoring systems, and diagnostic instruments. 5. Aerospace and Defense: Used in radar systems, avionics, and satellite communication equipment for reliable timing synchronization.

Detailed and Complete Alternative Models

1. 8N3QV01EG-0156CDI8: Similar specifications with a different output frequency range (10MHz to 1.5GHz).
2. 8N3QV01EG-0170CDI8: Higher output frequency range (10MHz to 1.7GHz) with similar characteristics.
3. 8N3QV01EG-0145CDI8: Lower output frequency range (10MHz to 1.45GHz) with similar features.

(Note: The above alternative models are for illustrative purposes and may not represent the actual available options in the market.)

This encyclopedia entry provides a comprehensive overview of the 8N3QV01EG-0161CDI8 IC, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.