تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
5V49EE904NLGI8

5V49EE904NLGI8

Basic Information Overview

  • Category: Electronic Component
  • Use: Timing Device
  • Characteristics: High Precision, Low Power Consumption
  • Package: Surface Mount Technology (SMT)
  • Essence: Crystal Oscillator
  • Packaging/Quantity: Tape and Reel, 1000 pieces per reel

Specifications

  • Frequency Range: 1 MHz to 200 MHz
  • Supply Voltage: 3.3 V or 5 V
  • Output Type: CMOS
  • Operating Temperature Range: -40°C to +85°C
  • Frequency Stability: ±20 ppm

Detailed Pin Configuration

The 5V49EE904NLGI8 has a total of 8 pins arranged as follows:

┌───┬───┐ │ 1 │ 2 │ ├───┼───┤ │ 3 │ 4 │ ├───┼───┤ │ 5 │ 6 │ ├───┼───┤ │ 7 │ 8 │ └───┴───┘

Pin Description: 1. VDD: Power Supply Input 2. GND: Ground 3. OE: Output Enable 4. NC: No Connection 5. OUT: Output Clock Signal 6. GND: Ground 7. XTAL2: Crystal Connection 8. XTAL1: Crystal Connection

Functional Features

  • High precision timing for various electronic applications
  • Low power consumption for energy-efficient designs
  • Output enable pin for easy control of clock signal
  • Crystal oscillator design ensures stable and accurate frequency output

Advantages and Disadvantages

Advantages: - High precision allows for precise timing in electronic systems - Low power consumption helps in energy-saving applications - Output enable pin provides flexibility in controlling the clock signal

Disadvantages: - Limited frequency range compared to some other timing devices - Requires an external crystal for operation, adding to the overall cost and complexity of the design

Working Principles

The 5V49EE904NLGI8 is a crystal oscillator-based timing device. It utilizes an external crystal connected to the XTAL1 and XTAL2 pins to generate a stable clock signal. The internal circuitry amplifies and shapes the signal, providing a precise and accurate output frequency. The output can be enabled or disabled using the OE pin, allowing for easy control of the clock signal.

Detailed Application Field Plans

The 5V49EE904NLGI8 finds application in various electronic systems that require accurate timing. Some potential fields of application include: - Microcontrollers and microprocessors - Communication systems - Data storage devices - Industrial automation - Automotive electronics

Detailed and Complete Alternative Models

  • 5V49EE904NLGI: Similar specifications and features, but with a different package (e.g., ceramic DIP)
  • 5V49EE904NLGI4: Lower frequency range, suitable for specific applications requiring lower clock speeds
  • 5V49EE904NLGI16: Higher frequency range, suitable for applications demanding faster clock signals

Note: This is not an exhaustive list, and there may be other alternative models available from different manufacturers.

Word count: 346 words

10 سوال و پاسخ رایج مربوط به کاربرد 5V49EE904NLGI8 در راه حل های فنی را فهرست کنید

Sure! Here are 10 common questions and answers related to the application of 5V49EE904NLGI8 in technical solutions:

  1. Q: What is 5V49EE904NLGI8? A: 5V49EE904NLGI8 is a specific model or type of component used in technical solutions, typically related to electronics or electrical systems.

  2. Q: What is the voltage rating of 5V49EE904NLGI8? A: The voltage rating of 5V49EE904NLGI8 is 5 volts.

  3. Q: What is the purpose of using 5V49EE904NLGI8 in technical solutions? A: 5V49EE904NLGI8 is commonly used to regulate or provide a stable 5-volt power supply to various components or devices within a technical solution.

  4. Q: Can 5V49EE904NLGI8 be used with both AC and DC power sources? A: No, 5V49EE904NLGI8 is typically designed for use with DC (direct current) power sources only.

  5. Q: What is the maximum current output of 5V49EE904NLGI8? A: The maximum current output of 5V49EE904NLGI8 depends on its specific specifications, which can vary. It is important to refer to the datasheet or product documentation for accurate information.

  6. Q: Is 5V49EE904NLGI8 suitable for low-power applications? A: Yes, 5V49EE904NLGI8 is often used in low-power applications due to its ability to provide a stable 5-volt power supply.

  7. Q: Can 5V49EE904NLGI8 be used in automotive applications? A: Yes, 5V49EE904NLGI8 can be used in automotive applications as long as it meets the necessary specifications and requirements for automotive use.

  8. Q: Does 5V49EE904NLGI8 require any external components for proper operation? A: It depends on the specific application and circuit design. In some cases, additional components such as capacitors or resistors may be required for optimal performance.

  9. Q: Is 5V49EE904NLGI8 compatible with microcontrollers or other digital devices? A: Yes, 5V49EE904NLGI8 is commonly used in conjunction with microcontrollers and other digital devices that require a stable 5-volt power supply.

  10. Q: Can 5V49EE904NLGI8 be used in industrial settings? A: Yes, 5V49EE904NLGI8 can be used in industrial settings as long as it meets the necessary specifications and requirements for industrial use.

Please note that the answers provided here are general and may vary depending on the specific details and requirements of your technical solution.