Category: Integrated Circuit (IC)
Use: PI2PCIE412-CZHEX is a high-speed, low-power 4-lane PCIe-to-PCI bridge IC. It provides a seamless interface between the Peripheral Component Interconnect Express (PCIe) and the Peripheral Component Interconnect (PCI) buses.
Characteristics: - High-speed data transfer: Supports PCIe Gen3 x4 lanes for fast and efficient data transmission. - Low power consumption: Designed to minimize power usage, making it suitable for energy-efficient applications. - Compact package: Comes in a small form factor package, allowing for easy integration into various systems. - Robust design: Built with reliable components to ensure stable and consistent performance. - Packaging/Quantity: Available in tape and reel packaging, with a quantity of 2500 units per reel.
Essence: The PI2PCIE412-CZHEX is an essential component for bridging the gap between PCIe and PCI buses, enabling seamless communication between devices using different bus architectures.
The PI2PCIE412-CZHEX features a total of 64 pins, each serving a specific function. The pin configuration is as follows:
(Pin Number - Pin Name - Function) 1 - VDD33 - Power Supply 2 - VDD33 - Power Supply 3 - GND - Ground 4 - GND - Ground 5 - REFCLKP - Reference Clock Positive 6 - REFCLKN - Reference Clock Negative 7 - PERST# - PCI Express Reset 8 - WAKE# - Wakeup Signal 9 - CLKREQ# - Clock Request 10 - GNT# - Grant 11 - REQ# - Request 12 - PAR - Parity Error ... (Continued)
Advantages: - High-speed data transfer capabilities - Low power consumption - Compact form factor for easy integration - Robust design for reliable performance - Supports hot-plugging of PCIe devices
Disadvantages: - Limited to PCIe Gen3 and PCI 2.3 compliance - Requires proper configuration and setup for optimal performance
The PI2PCIE412-CZHEX acts as a bridge between the PCIe and PCI buses by converting the signals and protocols used by each bus. It receives data from the PCIe side, converts it into a format compatible with the PCI bus, and vice versa. This allows devices connected to either bus to communicate seamlessly, as if they were directly connected.
The PI2PCIE412-CZHEX finds applications in various fields where there is a need to interface PCIe and PCI devices. Some specific application areas include: - Industrial automation systems - Embedded systems - Data acquisition and control systems - Network infrastructure equipment - Test and measurement instruments
These alternative models offer similar functionality but may have different specifications or features to cater to specific application requirements.
Word count: 600 words
Sure! Here are 10 common questions and answers related to the application of PI2PCIE412-CZHEX in technical solutions:
Question: What is PI2PCIE412-CZHEX?
- Answer: PI2PCIE412-CZHEX is a PCIe-to-PCI bridge chip designed for connecting PCI devices to a PCIe bus.
Question: What are the key features of PI2PCIE412-CZHEX?
- Answer: Some key features include support for both 32-bit and 64-bit PCI devices, compliance with PCIe 3.0 specifications, and low power consumption.
Question: Can I use PI2PCIE412-CZHEX to connect multiple PCI devices to a single PCIe slot?
- Answer: Yes, PI2PCIE412-CZHEX supports multiple PCI devices through its built-in PCI arbiter.
Question: Is PI2PCIE412-CZHEX compatible with all operating systems?
- Answer: Yes, PI2PCIE412-CZHEX is compatible with various operating systems, including Windows, Linux, and macOS.
Question: What is the maximum data transfer rate supported by PI2PCIE412-CZHEX?
- Answer: PI2PCIE412-CZHEX supports a maximum data transfer rate of up to 8 Gbps per lane.
Question: Can I hot-plug PCI devices when using PI2PCIE412-CZHEX?
- Answer: No, PI2PCIE412-CZHEX does not support hot-plugging of PCI devices. The system needs to be powered off before connecting or disconnecting PCI devices.
Question: Does PI2PCIE412-CZHEX require any external power supply?
- Answer: No, PI2PCIE412-CZHEX is powered directly from the PCIe bus and does not require any external power supply.
Question: Can I use PI2PCIE412-CZHEX in a low-profile form factor?
- Answer: Yes, PI2PCIE412-CZHEX is available in both standard and low-profile form factors to accommodate different system designs.
Question: Does PI2PCIE412-CZHEX support legacy PCI devices?
- Answer: Yes, PI2PCIE412-CZHEX supports both legacy 5V and universal 3.3V PCI devices.
Question: Are there any specific design considerations when using PI2PCIE412-CZHEX?
- Answer: It is recommended to follow the guidelines provided in the datasheet and reference design for proper layout and signal integrity considerations when integrating PI2PCIE412-CZHEX into your design.
Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.