Cantherm
تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
MF72-015D13
نمایش جزئیات برگه های اطلاعات

MF72-015D13: Product Overview and Specifications

Introduction

MF72-015D13 is a thermistor belonging to the category of NTC (Negative Temperature Coefficient) thermistors. This thermistor is widely used in various electronic applications due to its unique characteristics and versatile nature.

Basic Information Overview

  • Category: NTC Thermistor
  • Use: Temperature sensing, temperature compensation, inrush current limiting
  • Characteristics: High sensitivity to temperature changes, small size, fast response time
  • Package: Radial lead type
  • Essence: Reliable temperature measurement and control
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Resistance at 25°C: 15Ω ± 20%
  • Maximum Power Dissipation: 400mW
  • Operating Temperature Range: -55°C to 125°C
  • Thermal Time Constant: ≤10s

Detailed Pin Configuration

The MF72-015D13 thermistor has a radial lead type package with two leads. The pin configuration is as follows: - Pin 1: Connected to one end of the thermistor element - Pin 2: Connected to the other end of the thermistor element

Functional Features

  • Temperature Sensing: Provides accurate temperature measurements for various applications
  • Temperature Compensation: Used to compensate for temperature variations in electronic circuits
  • Inrush Current Limiting: Helps limit the inrush current during power-on of electronic devices

Advantages and Disadvantages

Advantages

  • High sensitivity to temperature changes
  • Fast response time
  • Small size allows for integration into compact designs

Disadvantages

  • Limited operating temperature range compared to some other thermistors
  • Sensitivity may require careful consideration in high-noise environments

Working Principles

The MF72-015D13 operates based on the principle of the negative temperature coefficient, where its resistance decreases as the temperature increases. This property enables it to be used for temperature sensing and compensation in electronic circuits.

Detailed Application Field Plans

The MF72-015D13 thermistor finds extensive use in various applications, including but not limited to: - Temperature measurement and control in consumer electronics - Inrush current limiting in power supplies and motor control circuits - Temperature compensation in automotive electronics

Detailed and Complete Alternative Models

Some alternative models to MF72-015D13 include: - MF52-103/3435F7: A similar NTC thermistor with a different resistance value - NTCLE100E3103JB0: Offers a wider operating temperature range for specific applications - NTCG163EH101JT1: Suitable for high-precision temperature sensing applications

In conclusion, the MF72-015D13 NTC thermistor offers reliable temperature sensing and compensation capabilities, making it a valuable component in various electronic systems.

Word count: 410

10 سوال و پاسخ رایج مربوط به کاربرد MF72-015D13 در راه حل های فنی را فهرست کنید

Sure, here are 10 common questions and answers related to the application of MF72-015D13 in technical solutions:

  1. What is MF72-015D13?

    • MF72-015D13 is a type of NTC thermistor, which is a temperature-sensitive resistor that exhibits a decrease in resistance with an increase in temperature.

  2. What are the typical applications of MF72-015D13?

    • MF72-015D13 is commonly used for overcurrent protection, inrush current limiting, temperature compensation, and temperature measurement in various electronic devices and circuits.

  3. How does MF72-015D13 provide overcurrent protection?

    • When the current flowing through MF72-015D13 exceeds a certain threshold, its resistance decreases, limiting the current flow and protecting the circuit from damage.

  4. Can MF72-015D13 be used for inrush current limiting?

    • Yes, MF72-015D13 can be used to limit the inrush current during the startup of electrical equipment, preventing damage to sensitive components.

  5. What are the key characteristics of MF72-015D13?

    • MF72-015D13 has a small size, high reliability, fast response time, and a wide operating temperature range, making it suitable for various technical solutions.

  6. How is MF72-015D13 integrated into temperature compensation circuits?

    • MF72-015D13 is used to compensate for temperature variations in electronic circuits by adjusting its resistance based on the ambient temperature, ensuring stable performance.

  7. What is the maximum operating temperature of MF72-015D13?

    • The maximum operating temperature of MF72-015D13 is typically around 125°C, making it suitable for use in moderate to high-temperature environments.

  8. Can MF72-015D13 be used for battery pack protection?

    • Yes, MF72-015D13 can be incorporated into battery pack protection circuits to prevent overcurrent conditions and ensure safe operation of the battery.

  9. How does MF72-015D13 contribute to temperature measurement applications?

    • MF72-015D13's resistance changes with temperature, allowing it to be used as a sensing element in temperature measurement circuits, providing accurate temperature readings.

  10. Are there any precautions to consider when using MF72-015D13 in technical solutions?

    • It's important to ensure proper heat dissipation, avoid mechanical stress, and adhere to the manufacturer's specifications for voltage and current ratings to maximize the performance and reliability of MF72-015D13 in technical solutions.