QD Devices Inc.
تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
ADG608BR
نمایش جزئیات برگه های اطلاعات

ADG608BR

Product Overview

Category

ADG608BR belongs to the category of analog multiplexers/demultiplexers.

Use

It is primarily used for signal routing and switching applications in electronic circuits.

Characteristics

  • Analog multiplexer with 8 channels
  • Low on-resistance: typically 50 ohms
  • Wide supply voltage range: ±4.5V to ±18V
  • Low power consumption: typically 1.5mW
  • Fast switching speed: typically 200ns

Package

ADG608BR is available in a 16-lead SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of ADG608BR lies in its ability to efficiently route analog signals in electronic systems, enabling seamless switching between multiple input sources.

Packaging/Quantity

ADG608BR is typically sold in reels containing 2500 units per reel.

Specifications

  • Number of Channels: 8
  • On-Resistance: 50 ohms (typical)
  • Supply Voltage Range: ±4.5V to ±18V
  • Power Consumption: 1.5mW (typical)
  • Switching Speed: 200ns (typical)
  • Package Type: 16-lead SOIC

Detailed Pin Configuration

  1. IN1 - Input Channel 1
  2. IN2 - Input Channel 2
  3. IN3 - Input Channel 3
  4. IN4 - Input Channel 4
  5. IN5 - Input Channel 5
  6. IN6 - Input Channel 6
  7. IN7 - Input Channel 7
  8. IN8 - Input Channel 8
  9. VDD - Positive Supply Voltage
  10. GND - Ground
  11. S1 - Control Pin 1
  12. S0 - Control Pin 0
  13. COM - Common Terminal
  14. NO1 - Normally Open Switch 1
  15. NO2 - Normally Open Switch 2
  16. NO3 - Normally Open Switch 3

Functional Features

  • High channel count for versatile signal routing
  • Low on-resistance ensures minimal signal distortion
  • Wide supply voltage range allows compatibility with various systems
  • Low power consumption for energy-efficient operation
  • Fast switching speed enables real-time signal switching

Advantages and Disadvantages

Advantages

  • Versatile signal routing capabilities
  • Low signal distortion
  • Wide compatibility with different systems
  • Energy-efficient operation
  • Real-time signal switching

Disadvantages

  • Limited to analog signal routing
  • May require additional components for complex applications

Working Principles

ADG608BR operates based on the principle of analog multiplexing. It uses a combination of control signals (S1 and S0) to select one of the eight input channels and connect it to the common terminal (COM). This allows the desired analog signal to pass through while blocking the others.

Detailed Application Field Plans

ADG608BR finds applications in various fields, including:

  1. Audio Systems: Enables seamless switching between different audio sources.
  2. Instrumentation: Facilitates signal routing in measurement and testing equipment.
  3. Communication Systems: Allows flexible routing of analog signals in communication devices.
  4. Industrial Automation: Provides efficient signal switching in control systems.
  5. Medical Equipment: Enables precise selection of analog signals in medical devices.

Detailed and Complete Alternative Models

  1. ADG609BR: Similar to ADG608BR but with 16 channels instead of 8.
  2. ADG611BR: Analog multiplexer/demultiplexer with 4 channels and lower on-resistance.
  3. ADG612BR: Multiplexer with 16 channels and higher switching speed.

These alternative models offer different channel counts and performance characteristics to suit specific application requirements.

10 سوال و پاسخ رایج مربوط به کاربرد ADG608BR در راه حل های فنی را فهرست کنید

Sure! Here are 10 common questions and answers related to the application of ADG608BR in technical solutions:

  1. Q: What is ADG608BR? A: ADG608BR is a multiplexer/demultiplexer IC (integrated circuit) that allows for the selection of one input from multiple inputs or routing of one output to multiple outputs.

  2. Q: What is the voltage range supported by ADG608BR? A: ADG608BR supports a wide voltage range of ±15V, making it suitable for various applications.

  3. Q: How many channels does ADG608BR have? A: ADG608BR has 8 channels, meaning it can handle up to 8 different inputs or outputs.

  4. Q: Can ADG608BR be used for both analog and digital signals? A: Yes, ADG608BR is designed to work with both analog and digital signals, making it versatile for different applications.

  5. Q: What is the maximum frequency range supported by ADG608BR? A: ADG608BR can operate at frequencies up to 100MHz, allowing for high-speed signal switching.

  6. Q: Is ADG608BR compatible with TTL and CMOS logic levels? A: Yes, ADG608BR is fully compatible with both TTL and CMOS logic levels, ensuring seamless integration with other components.

  7. Q: Can ADG608BR be cascaded to increase the number of channels? A: Yes, multiple ADG608BR ICs can be cascaded together to increase the number of channels as per the requirements of the application.

  8. Q: Does ADG608BR support bidirectional signal flow? A: Yes, ADG608BR supports bidirectional signal flow, allowing for both input and output signals to be routed.

  9. Q: What is the power supply voltage required for ADG608BR? A: ADG608BR operates on a single power supply voltage ranging from 4.5V to 16.5V.

  10. Q: Can ADG608BR handle high-voltage signals? A: No, ADG608BR is not designed to handle high-voltage signals. It is recommended to stay within the specified voltage range for optimal performance and reliability.

Please note that these answers are general and may vary depending on the specific application and requirements.