تصویر ممکن است نشان دهنده باشد.
برای جزئیات محصول به مشخصات مراجعه کنید.
S-80920CLPF-G6QTFG

S-80920CLPF-G6QTFG

Product Overview

Category

S-80920CLPF-G6QTFG belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage monitoring and reset functions.

Characteristics

  • Low power consumption
  • Wide operating voltage range
  • High accuracy
  • Small package size

Package

The S-80920CLPF-G6QTFG is available in a small surface mount package.

Essence

The essence of this product lies in its ability to provide reliable voltage monitoring and reset functionality in various electronic applications.

Packaging/Quantity

The S-80920CLPF-G6QTFG is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Supply Voltage Range: 1.2V to 5.5V
  • Threshold Voltage Options: 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 4.0V
  • Operating Temperature Range: -40°C to +85°C
  • Output Type: Active Low
  • Quiescent Current: 1μA (typical)
  • Reset Time Delay: 200ms (typical)

Detailed Pin Configuration

The S-80920CLPF-G6QTFG has the following pin configuration:

  1. VDD (Supply Voltage)
  2. GND (Ground)
  3. MR (Manual Reset)
  4. RESET (Reset Output)

Functional Features

  • Voltage monitoring: The IC continuously monitors the supply voltage and provides a reset signal when it falls below a certain threshold.
  • Manual reset: The MR pin allows for manual reset control, enabling system initialization or recovery.
  • Active low output: The RESET pin provides an active low reset signal to the connected circuitry.

Advantages and Disadvantages

Advantages

  • Low power consumption ensures minimal impact on overall system energy efficiency.
  • Wide operating voltage range allows for compatibility with various power supply configurations.
  • High accuracy ensures reliable voltage monitoring and precise reset functionality.
  • Small package size enables space-saving designs in compact electronic devices.

Disadvantages

  • Limited threshold voltage options may restrict compatibility with specific voltage requirements.
  • Reset time delay of 200ms may not be suitable for applications requiring faster response times.

Working Principles

The S-80920CLPF-G6QTFG operates by continuously monitoring the supply voltage using an internal voltage reference. When the voltage falls below the set threshold, the IC triggers a reset signal, which can be used to initialize or recover the connected system. The manual reset pin allows for additional control over the reset function.

Detailed Application Field Plans

The S-80920CLPF-G6QTFG finds application in various electronic devices where voltage monitoring and reset functions are critical. Some potential application fields include:

  1. Microcontrollers: Ensuring proper initialization and recovery of microcontroller-based systems.
  2. Power management: Protecting sensitive components from undervoltage conditions.
  3. Industrial automation: Enabling reliable operation of control systems during power fluctuations.
  4. Automotive electronics: Providing voltage monitoring and reset functionality in automotive applications.

Detailed and Complete Alternative Models

  1. S-80930CLPF-G6QTFG: Similar to S-80920CLPF-G6QTFG but with a higher threshold voltage option (3.3V, 3.4V, 3.5V).
  2. S-80910CLPF-G6QTFG: Similar to S-80920CLPF-G6QTFG but with a lower threshold voltage option (2.7V, 2.8V, 2.9V).

These alternative models offer similar functionality with slight variations in threshold voltage options to cater to different system requirements.

In conclusion, the S-80920CLPF-G6QTFG is a versatile integrated circuit that provides reliable voltage monitoring and reset functions in various electronic applications. Its low power consumption, wide operating voltage range, and small package size make it an ideal choice for space-constrained devices. However, its limited threshold voltage options and reset time delay may pose limitations in certain applications.

10 سوال و پاسخ رایج مربوط به کاربرد S-80920CLPF-G6QTFG در راه حل های فنی را فهرست کنید

  1. What is the operating voltage range of S-80920CLPF-G6QTFG?
    - The operating voltage range of S-80920CLPF-G6QTFG is 0.7V to 10.0V.

  2. What is the typical quiescent current of S-80920CLPF-G6QTFG?
    - The typical quiescent current of S-80920CLPF-G6QTFG is 1.0μA.

  3. Can S-80920CLPF-G6QTFG be used in battery-powered applications?
    - Yes, S-80920CLPF-G6QTFG is suitable for battery-powered applications due to its low quiescent current.

  4. What is the output voltage accuracy of S-80920CLPF-G6QTFG?
    - The output voltage accuracy of S-80920CLPF-G6QTFG is ±2.0%.

  5. Is S-80920CLPF-G6QTFG suitable for automotive applications?
    - Yes, S-80920CLPF-G6QTFG is AEC-Q100 qualified and can be used in automotive applications.

  6. What is the maximum output current of S-80920CLPF-G6QTFG?
    - The maximum output current of S-80920CLPF-G6QTFG is 200mA.

  7. Can S-80920CLPF-G6QTFG withstand reverse polarity?
    - No, S-80920CLPF-G6QTFG cannot withstand reverse polarity. Proper circuit protection should be implemented.

  8. What is the temperature range for S-80920CLPF-G6QTFG?
    - S-80920CLPF-G6QTFG has a temperature range of -40°C to 125°C.

  9. Does S-80920CLPF-G6QTFG have built-in overcurrent protection?
    - Yes, S-80920CLPF-G6QTFG features built-in overcurrent protection.

  10. Can S-80920CLPF-G6QTFG be used in industrial control systems?
    - Yes, S-80920CLPF-G6QTFG is suitable for use in industrial control systems due to its wide operating voltage range and temperature range.